Search found 10 matches

by mchouinard
Wed Jan 06, 2016 3:06 pm
Forum: Getting Started
Topic: Linux version feedback tool not working
Replies: 1
Views: 2899

Linux version feedback tool not working

Hi, Please note the feedback tool does not work!!! I had login to send feedback. This extra steps, may discourage feedback efforts. I would like to add that a Linux software version is very important to many of us since Linux is much more stable OS and cost effective to to set-up working lab environ...
by mchouinard
Sun Jan 03, 2016 9:01 pm
Forum: Getting Started
Topic: PicoScope MAC 6.11.8.11 bugs issues
Replies: 1
Views: 2774

PicoScope MAC 6.11.8.11 bugs issues

Using a IMAC27 i7 12gig ram While using PicoScope 6.11.8.11 keyboard is unresponsive while signal is processing. Keyboard input ok if stop button is enable. I wanted to send feed back, unfortunately it also is not working. I mean no disrespect but are you actually checking these beta software prior ...
by mchouinard
Wed Dec 23, 2015 12:02 am
Forum: PicoScope 6 for Linux
Topic: Linux Picoscope 6.11.8.10 CRASH
Replies: 2
Views: 4477

Linux Picoscope 6.11.8.10 CRASH

Hi have been using Linux Mint 7.0 with Picoscope version 6.11.8.3 and it was fine until I made an upgrade to 6.11.8.10. I reinstalled the on a Dell laptop Linux Mint 7.2 with same CRASH result. Pretty please could you make available the previous version 6.11.8.3 until bugs are fixed? Don't get me wr...
by mchouinard
Thu Dec 17, 2015 5:54 pm
Forum: PicoScope 6 for Linux
Topic: Picoscope doesn't works under Ubuntu after last updates
Replies: 16
Views: 88434

Re: Picoscope doesn't works under Ubuntu after last updates

Hi, I have upgraded to Linux Mint 17.2 and reinstalled the latest PicoScope software version and the software crashed within a couple minutes. I tried the suggested fix, unfortunately it does not help. Is it possible to get old version back until this issue get resolved? Regard Michel from Canada Pi...
by mchouinard
Tue Oct 20, 2015 4:01 pm
Forum: Getting Started
Topic: 6402D persistence mode issue
Replies: 10
Views: 10170

Re: 6402D persistence mode issue

Hi Martyn, Are you using the USB3 cable with the 6402D, and into a USB3 port on your PC ? Re: Yes Have you tried using the same USB2 cable and PC port when comparing the units ? Re: I have ran tests using USB2, USB3.0, USB3.1 my finding are as follow; -There is a substantial performance hit using US...
by mchouinard
Tue Oct 13, 2015 9:19 pm
Forum: Getting Started
Topic: 6402D persistence mode issue
Replies: 10
Views: 10170

Re: 6402D persistence mode issue

Hi Martyn,

Yes it is.


>Thank you for your support.

Michel from >Canada
by mchouinard
Thu Oct 08, 2015 2:47 pm
Forum: Getting Started
Topic: 6402D persistence mode issue
Replies: 10
Views: 10170

Re: 6402D persistence mode issue

response 8 oct.JPG Hi Gerry, I have repeated the test with a trigger level set at 100 mv and the capture rate jump to 150 (MUCH IMPROVED). I repeated the test at lower trigger level setting and I got similar results down to 8 mv. I continue testing and at trigger level below 8 mv I get a ghost effe...
by mchouinard
Tue Oct 06, 2015 6:00 pm
Forum: Getting Started
Topic: 6402D persistence mode issue
Replies: 10
Views: 10170

Re: 6402D persistence mode issue

Hi Gerry, I have repeated the test and I can assure you that test condition were absolutely similar for the 6402D and the 5204 Picoscope which are sitting side by side. I have also used use the channel B to display trigger level to assure you that we are on same page. As I indicated earlier the trig...
by mchouinard
Sun Sep 27, 2015 3:16 pm
Forum: Getting Started
Topic: 6402D persistence mode issue
Replies: 10
Views: 10170

Re: 6402D persistence mode issue

Hi Sir, I am having an issue with the persistence viewing mode on my PicoScope 6402D. Equipment PicoScope 6402D Serial CP472/012 USB Version 3.0 Calibration date : 10 Décember 2014 Hardware revision 11 Driver version 1.4.4.45 Firmware revision 1.0.2.0/1.1.37.0 PicoScope 5204 Serial YJL38/25 USB Vers...
by mchouinard
Fri Sep 25, 2015 2:54 pm
Forum: Getting Started
Topic: 6402D persistence mode issue
Replies: 10
Views: 10170

6402D persistence mode issue

Hi Sir, I am having an issue with the persistence viewing mode on my PicoScope 6402D. Equipment PicoScope 6402D Serial CP472/012 USB Version 3.0 Calibration date : 10 Décember 2014 Hardware revision 11 Driver version 1.4.4.45 Firmware revision 1.0.2.0/1.1.37.0 I conducted a series of tests using a P...