OK so I can use Parameters to 'rename' them, but I do not know which input socket was which.

Is there anyway I can get that information out of the file, or I just have to guess that the order the yare listed is the order of the inputs?

Cheers

The calculated parameters can be changed but how about the titles of the inputs?
I have a couple of recordings where they were guessed, incorrectly, and I now need to correct them.

Cheers

I completed a test and found that the I had set the inputs and calculated parameters incorrectly for two channels.

Is there a way I can correct the details and calculate new figures in PicoLog or do I have to export the raw data to Excel and do it that way?

Thanks

Peter

The file is saving to a Network Drive, the application is on the local HDD

No, when PL freezes and I close it down, Windows reports it is not responding and I confirm it is to be closed.

If I then try and open PL it opens as Player.
The only way I can run PL again is to reboot the PC.

Peter

PicoLog Ver 20, Xp, Desktop, plw file and folder on Network. When I try to open a recording to use the settings for new data, PL freezes. I have to terminate the application. Then PL will not run it opens as Reader, I assume it thinks PL is still open. I have to reboot the PC to run PL again !!! Peter

I hope some one can help with this !! I have been using the ADC with one instrument for some time with perfect results. This circuit is from a battery powered unit so I have had to wire in a 24V DC supply. The additional instrument is 3 channel and mains powered and when I connect it to the ADC Term...