Search found 8 matches

by KeithSloan
Fri Feb 19, 2016 10:48 pm
Forum: PicoScope 6 for Mac
Topic: Pressing Stop button.
Replies: 2
Views: 5699

Re: Pressing Stop button.

Tried Mono 4.2.2 but still problems with pressing stop. Beginning to regret buying a Picoscope. Was aware that software was beta on Mac when I brought, but did not realise that it was built on top of Mono an open source implementation of .Net. Suspect that Mono is going to end up the same as WINE. i...
by KeithSloan
Thu Feb 18, 2016 5:06 pm
Forum: PicoScope 6 for Mac
Topic: Pressing Stop button.
Replies: 2
Views: 5699

Pressing Stop button.

I am sometimes having problems pressing the stop button.

I am on Picoscope 6.11.8.11 mono 4.2.1. Wondering if its worth trying Mono 4.2.2.

Anybody successfully running with mono 4.2.2?
by KeithSloan
Wed Jan 20, 2016 10:55 am
Forum: PicoScope 6 for Linux
Topic: Question on signal generator.
Replies: 2
Views: 5204

Re: Question on signal generator.

Is it not possible to improve the possibilities of the offset voltage. The current range is -2v to +2v i.e. 4v which is very understandable for a device powered by a 5v USB. But it would be a good improvement if one could adjust the offset to be 1.65v and the range to 3.3v so that one could have a s...
by KeithSloan
Sat Jan 16, 2016 4:59 pm
Forum: PicoScope 6 for Linux
Topic: Question on signal generator.
Replies: 2
Views: 5204

Question on signal generator.

I am new to picoscope and running on Mac & linux as I have problems with the Mac version. Anyway I was trying the signal generator. If I choose amplitude 1V and then offset 1V it gives me a signal going from 0 to 2 volts. If I then increase the amplitude to 2V nothing changes. I was hoping I could g...
by KeithSloan
Sat Jan 16, 2016 11:41 am
Forum: PicoScope 6 for Mac
Topic: wrong voltage after screen blank.
Replies: 3
Views: 20687

Re: wrong voltage after screen blank.

Files sent to support.

Tried the signal generator which is very difficult to use as values do not change correctly and unable to enter values. Also offset voltage does not work at all.
by KeithSloan
Thu Jan 14, 2016 12:51 pm
Forum: PicoScope 6 for Mac
Topic: wrong voltage after screen blank.
Replies: 3
Views: 20687

wrong voltage after screen blank.

If I don't input into my mac for a short while the screen goes blank, when I wake it up by pressing enter picoscope shows the wrong voltage and seems not to work properly, I end up having to restart the application. Picoscope 6.11.8.11 Mac OSX 10.11.2 mono 4.2.1.102. I have checked the voltage with ...
by KeithSloan
Wed Jan 13, 2016 11:22 am
Forum: PicoScope 6 for Mac
Topic: Unable to enter email or send feedback.
Replies: 3
Views: 6617

Unable to enter email or send feedback.

When I start picoscope on Mac 10.11.2 I cannot enter email address or send feedback via the application. Mono is 4.2.1.102
by KeithSloan
Sat Apr 05, 2008 6:02 pm
Forum: General Software Discussions
Topic: Picoscope PSD file format.
Replies: 3
Views: 7137

Picoscope PSD file format.

Is the Picoscope PSD file format documented anywhere? I would to look at writing some software to convert it to a different format.

Many Thanks