Search found 974 matches

by Gerry
Fri Jul 23, 2021 11:23 am
Forum: Getting Started
Topic: New User, Using 4224 to work a sequence using SDK
Replies: 8
Views: 4681

Re: New User, Using 4224 to work a sequence using SDK

Hi Benno, OK, I see what you were suggesting now. You're saying that the captures on A should be distinguishable in case the data is out of sequence (as you say in case of missing 1 of the captures), so you're not attempting to use 3 channels. However, it may be easy to see if the data sets go out-o...
by Gerry
Thu Jul 22, 2021 5:16 pm
Forum: Getting Started
Topic: New User, Using 4224 to work a sequence using SDK
Replies: 8
Views: 4681

Re: New User, Using 4224 to work a sequence using SDK

Hi sMac, Sorry for the delay in responding. We have had high numbers of support requests on the HelpDesk, so it has been difficult to get around to answering posts on the Forum. If I understand you correctly then you have a device under test that is providing data to Channel A, while you are receivi...
by Gerry
Thu Jul 22, 2021 4:11 pm
Forum: .Net Languages (C#, VB.Net, .)
Topic: Data transfer started signal
Replies: 1
Views: 7561

Re: Data transfer started signal

Hi MattC15, Sorry for the delay in answering. Not sure I understand what it is that you want to do. If you are streaming the data, then you will only be capturing data before (not during) it is transferred to the computer. If, by your question, you mean is there a way to let your application (runnin...
by Gerry
Tue Jul 13, 2021 6:27 pm
Forum: PicoScope 6 for Windows
Topic: Picoscope 6.14.23.5207 crashes when external power is connected
Replies: 11
Views: 5278

Re: Picoscope 6.14.23.5207 crashes when external power is connected

Hi Benno,

While this is being looked at, I have been prompted to ask you if there was a probe connected at the time of the crash?

Regards,

Gerry
by Gerry
Thu Jul 01, 2021 10:27 am
Forum: Getting Started
Topic: Is there the area where eeprom can read/write the information?
Replies: 2
Views: 4908

Re: Is there the area where eeprom can read/write the information?

Hi Yasu, Sorry, I forgot to add that you can scale the data from the signal converter in PicoLog 6. Just go to the Channel, and then select 'Advanced Options', click in 'Probe or Scaling', the select the method that you would like to use (equation or table) and then enter the equation for the x and ...
by Gerry
Thu Jul 01, 2021 10:12 am
Forum: General Software Discussions
Topic: max sample rate for 2206B is 16ns by ps2000aStreamingExample.py function
Replies: 7
Views: 8391

Re: max sample rate for 2206B is 16ns by ps2000aStreamingExample.py function

Hi richk449, Sorry for the late response. The data file that you sent is using an automatic trigger (which is firing every 2 seconds) which is not a high waveform update rate. Could you send the data file that you said gave you the high waveform update rate, high sample rate and unlimited captures (...
by Gerry
Wed Jun 30, 2021 4:14 pm
Forum: Getting Started
Topic: New User, Using 4224 to work a sequence using SDK
Replies: 8
Views: 4681

Re: New User, Using 4224 to work a sequence using SDK

Hi sMac, Unfortunately, every time you change settings after a capture, or initiate a capture, after changing the settings, the communication between the PicoScope and computer needs to be re-established. The time to establish communication just once would be 10s of milliseconds (you couldn't even r...
by Gerry
Wed Jun 30, 2021 2:54 pm
Forum: USB PC Oscilloscopes
Topic: Is it okay to power PicoScope 5000 series 24/7
Replies: 1
Views: 5534

Re: Is it okay to power PicoScope 5000 series 24/7

Hi lsm0828, Having the PicoScope connected for a long time would not be a problem for the PicoScope (it has been designed to be able to stream data to the computer for extended periods of time) however, it may be a problem for the PC interaction with PicoScope 6 software, as there can be anomalies t...
by Gerry
Wed Jun 30, 2021 2:44 pm
Forum: PicoScope 6 for Windows
Topic: Save Serial Decoding data using command line
Replies: 1
Views: 3639

Re: Save Serial Decoding data using command line

Hi MattC15, Unfortunately, the Automation commands were developed for in house testing, and have long since been replaced. Our Serial Decoding was implemented, as it is now, after development of the automation commands was stopped, so there are no commands for exporting it. The only other way that I...
by Gerry
Wed Jun 30, 2021 2:36 pm
Forum: Getting Started
Topic: Is there the area where eeprom can read/write the information?
Replies: 2
Views: 4908

Re: Is there the area where eeprom can read/write the information?

Hi yasu,

I have edited this post.

The ability to write information to our hardware is not something that is available for customers or Calibration Labs.

Regards,

Gerry
by Gerry
Wed Jun 30, 2021 2:03 pm
Forum: General Software Discussions
Topic: Triggering and Streaming
Replies: 3
Views: 2877

Re: Triggering and Streaming

Hi richk449,

Sorry for the late response,

Could you post a psdata file for the capture that you say you can achieve in PicoScope 6?

Regards,

Gerry
by Gerry
Wed Jun 30, 2021 1:59 pm
Forum: Getting Started
Topic: Serial Decode UART - Channel B not appearing
Replies: 3
Views: 2827

Re: Serial Decode UART - Channel B not appearing

Hi NeilPeers, Sorry for the late response. Unfortunately, there was not enough information given relating to the missing function. If this occurs again, I would suggest that you repost the issue here and send the details to our help desk (support@picotech.com), so that we can look into this in more ...
by Gerry
Thu Jun 24, 2021 9:26 am
Forum: General Software Discussions
Topic: max sample rate for 2206B is 16ns by ps2000aStreamingExample.py function
Replies: 7
Views: 8391

Re: max sample rate for 2206B is 16ns by ps2000aStreamingExample.py function

Hi richk449 , It sounds like you're using Rapid Trigger Mode in PicoScope 6 (where you get the little silhouette of a Hare in the bottom right of the display indicating how many Rapid Trigger captures you are performing at once). Could you post the psdata file so that we can confirm what you are doi...
by Gerry
Thu Jun 24, 2021 12:57 am
Forum: PicoScope 6 for Windows
Topic: Quality factor calculation
Replies: 4
Views: 3052

Re: Quality factor calculation

Hi Karl, Sorry for the delay in responding. The answer to this post required quite a bit of work, so I had to wait until I could set aside some time to do it. As the derivation of a Damping Coefficient or Quality-factor is used in so many aspects of Engineering and Science, I had to agree that we sh...
by Gerry
Tue Jun 22, 2021 3:42 pm
Forum: USB DrDAQ
Topic: Read raw mV value from DrDAQ's pH channel from the SDK
Replies: 4
Views: 8146

Re: Read raw mV value from DrDAQ's pH channel from the SDK

Hi MaximeDL, Sorry for the delay in responding. This one took awhile to resolve because it required sifting through legacy code in the driver for the DrDaq, which was written some time ago (and our development team are over extended, pushing hard to get the next version of our Software out, among ot...