Search found 933 matches

by Gerry
Wed Apr 14, 2021 10:25 am
Forum: PicoScope 6 for Windows
Topic: Reference waveform
Replies: 3
Views: 160

Re: Reference waveform

Hi Steve,

Sure, send it to support@picotech.com and put my name in the title.

Regards,

Gerry
by Gerry
Tue Apr 13, 2021 3:59 pm
Forum: Getting Started
Topic: Capture a dynamic time measurement between two different channels
Replies: 2
Views: 186

Re: Capture a dynamic time measurement between two different channels

Hi khaldrogo,, One thing I forgot to mention in my previous post was that you need to be able to guarantee isolated single pulses on each channel for the duration of the captures. If there is more than one pulse on a channel, the Math Channels will not work correctly (as you will have a mixture of c...
by Gerry
Mon Apr 12, 2021 3:05 pm
Forum: General Software Discussions
Topic: Saving long range spectrum
Replies: 1
Views: 74

Re: Saving long range spectrum

Hi Peter,

We would need to know the details of what you are plotting (what the Timegate is, whether you are using a primary or secondary view for the plot, etc). So could you post the data file showing the Spectrum plot so that we can see exactly what you are doing.

Regards,

Gerry
by Gerry
Mon Apr 12, 2021 2:16 pm
Forum: Getting Started
Topic: Capture a dynamic time measurement between two different channels
Replies: 2
Views: 186

Re: Capture a dynamic time measurement between two different channels

Hi khaldrogo, Sorry for the delayed response (I've been on leave). You didn't give any more detail about the pulses, so I'll assume that they are the same or similar, and one is always leading the other. What you can do is position the trigger near to the start of the capture, and then select a Time...
by Gerry
Mon Apr 12, 2021 9:43 am
Forum: PicoScope 6 for Windows
Topic: Reference waveform
Replies: 3
Views: 160

Re: Reference waveform

Hi stevie44,

Could you post a psdata file, and explain exactly what you're doing, if you're not just duplicating the waveform in the Reference Waveform setup.

Regards,

Gerry
by Gerry
Mon Apr 12, 2021 9:21 am
Forum: USB PC Oscilloscopes
Topic: 2208A vs 2208B
Replies: 1
Views: 178

Re: 2208A vs 2208B

Hi Ike,

Sorry for the late response (I've been on leave).

The 2208A is actually a different Scope (no changes in how we measure things).

Regards,

Gerry
by Gerry
Wed Mar 31, 2021 4:18 pm
Forum: PicoScope 6 for Windows
Topic: Pulse width low wrong
Replies: 1
Views: 172

Re: Pulse width low wrong

Hi dosika, Its always difficult to comment on an image alone, especially if it doesn't represent the entire captured data. However, there is likely to be a plausible reason as to why you got the "error" in the measurement on the occasion that your image represents. For instance, if there was also a ...
by Gerry
Wed Mar 31, 2021 10:30 am
Forum: Projects
Topic: 24V logic analyzer
Replies: 3
Views: 333

Re: 24V logic analyzer

Hi Benno,

That's some great work. Thanks for posting.

Regards,

Gerry
by Gerry
Wed Mar 31, 2021 10:13 am
Forum: PicoScope 6 for Windows
Topic: Feature request: Show channel values corresponding to the interrogated time
Replies: 1
Views: 708

Re: Feature request: Show channel values corresponding to the interrogated time

Hi randy3,

This is a feature that will be available in our new version of software.

Regards,

Gerry
by Gerry
Wed Mar 31, 2021 9:31 am
Forum: General Software Discussions
Topic: Automatisation of data extraction from Deep Measure
Replies: 1
Views: 292

Re: Automatisation of data extraction from Deep Measure

Hi zlopko, It may have been better to ask this question on the PicoAuto forum, as that is the source of your information, and those guys are using serial decoding a lot more than we are, so they are likely to have information that we don't have. As far as I'm aware, there is no way to automatically ...
by Gerry
Tue Mar 30, 2021 4:56 pm
Forum: Projects
Topic: Measuring belt slippage
Replies: 3
Views: 2368

Re: Measuring belt slippage

Hi James, This is relatively straightforward in terms of a method and one that springs to mind is:- if the speed sensors on the shafts are detecting rate of rotation, and the shafts are all the same diameter, then you can just subtract each rotation rate of the shafts being driven, from the rotation...
by Gerry
Mon Mar 29, 2021 8:14 pm
Forum: PicoScope 6 for Windows
Topic: Missing data between waveform buffers
Replies: 1
Views: 189

Re: Missing data between waveform buffers

Hi ivinnykov, It's not a bug, it's partly to do with the way you are using it, and partly to do with the physical limitations of capturing data. You may be used to capturing data in a Data Logger, where you just start the capture, and then leave the data logger to just constantly acquire the data an...
by Gerry
Mon Mar 29, 2021 5:36 pm
Forum: Pre-Sales Advice
Topic: Picoscope 2206B
Replies: 1
Views: 210

Re: Picoscope 2206B

Hi Grommit, You should have no problem driving an LED from the output of Signal Generator. 40kHz is a period of 20us, which for a duty cycle of 20% will give you a pulse width of 4us. The minimum pulse width in a PS2206B would be 1us (maximum frequency of 1MHz), so pulse width in the Arbitrary Wavef...
by Gerry
Mon Mar 29, 2021 4:17 pm
Forum: USB DrDAQ
Topic: Read raw mV value from DrDAQ's pH channel from the SDK
Replies: 1
Views: 276

Re: Read raw mV value from DrDAQ's pH channel from the SDK

Hi MaximeDL, Last time I checked, this was done in the Driver (in order to provide Temperature compensation based on the sensed connection of the DD100 Temperature sensor to the relevant input channel). That was for PicoLog 5, but I wouldn't expect that to be different for PicoLog 6. However, one of...
by Gerry
Mon Mar 22, 2021 6:54 pm
Forum: USB PC Oscilloscopes
Topic: USB Device Not Recognized -5244D - USB3
Replies: 9
Views: 735

Re: USB Device Not Recognized -5244D - USB3

H iBSI, Here's the search results: https://www.google.com/search?q=VL812+usb+issue&rlz=1C1GCEU_en-GBGB913GB914&oq=VL812+usb+issue&aqs=chrome..69i57j33i160.5717j0j7&sourceid=chrome&ie=UTF-8 I didn't follow these up because I'm not able to do anything with the information, and I didn't go into detail ...