Search found 10 matches

by mpgreen
Wed Nov 17, 2010 10:24 am
Forum: PicoScope 6 for Windows
Topic: UART decoding
Replies: 32
Views: 34629

Re: UART decoding

Hi, If you haven't already got a sample, I've got a screen shot & psdata for the UART back to back timing issue. ('1', '2', '3' sent) It looks like when you specify 8n1 the UART decoder is actaully waiting for all 10 bits (start, 8 data, stop) and so missing the falling edge of the next start bit. A...
by mpgreen
Thu Sep 04, 2008 10:25 am
Forum: PicoScope 6 for Windows
Topic: R6.1.0 unstable with PS3424
Replies: 5
Views: 8035

R6.1.0 unstable with PS3424

Hi, Upgraded from 6.0.13 to 6.1.0 PS3424 Scope unplugged during installation. After install plugged in PS3424 Started 6.1.0 - PS3424 was not detected File-> Connect Device Error dialog pops up & 6.1.0 closes itself. Connected PS3424 to different port, installed driver for new port. Restart 6.0.1 Sam...
by mpgreen
Thu Jul 12, 2007 1:04 pm
Forum: PicoScope 5
Topic: .PSD file annoyingly saves window state
Replies: 4
Views: 7214

Ok, thanks for that.
Its a shame about the confidentiality thing on the psd file format but if its going to be fixed in the next revision then thats fine.

Thanks again.

Mark.
by mpgreen
Thu Jul 12, 2007 11:05 am
Forum: PicoScope 5
Topic: .PSD file annoyingly saves window state
Replies: 4
Views: 7214

But I have over 300 files saved! Normally I would just scan through them using pgup pgdown (a very useful feature). But in this instance I cannot because they were all captured with the window in a minimised state. If you could tell me where in the .psd file the window state is saved I'll just strip...
by mpgreen
Thu Jul 12, 2007 10:05 am
Forum: PicoScope 5
Topic: .PSD file annoyingly saves window state
Replies: 4
Views: 7214

.PSD file annoyingly saves window state

Hi, It appears that the .psd file save the state of the picoscope window along with the captured data. This is a real pain in the ass if the window was minimised during capture because when you scroll up and down to view previously captured files the pico scope window keeps minimising itself. Any ch...
by mpgreen
Wed Jun 13, 2007 11:52 am
Forum: PicoScope 5
Topic: 3424 Save on Trigger doesn't work
Replies: 4
Views: 7012

Sounds like the same bug to me. Any idea when there will be a fix for this Pico?
by mpgreen
Tue Jun 05, 2007 7:46 am
Forum: PicoScope 5
Topic: 3424 Assign Rulers to Ch 3 and 4 in PicoScope
Replies: 6
Views: 9393

Cheers!
by mpgreen
Wed May 23, 2007 8:58 am
Forum: PicoScope 5
Topic: 3424 Assign Rulers to Ch 3 and 4 in PicoScope
Replies: 6
Views: 9393

Will this be fixed in the next release of software?
by mpgreen
Tue May 22, 2007 3:01 pm
Forum: PicoScope 5
Topic: 3424 Assign Rulers to Ch 3 and 4 in PicoScope
Replies: 6
Views: 9393

3424 Assign Rulers to Ch 3 and 4 in PicoScope

Assigning rulers in Picoscope using PS3424

Left click = assign a ruler to Ch1.
Right click = assign to Ch 2.
How do you assign to Ch3 and Ch4?

Regards,

Mark.
by mpgreen
Tue May 22, 2007 7:49 am
Forum: PicoScope 5
Topic: 3424 Save on Trigger doesn't work
Replies: 4
Views: 7012

3424 Save on Trigger doesn't work

Hi, I own two picoscopes, ADC212/3 and PS3424. I am running the latest version of Picoscope software: 5.16.2 Save on trigger works for the ADC212 but not the PS3424. With the 3424 new triggers are registered and the display updates but the file name/number does not increment and the new trigger is n...