Search found 6 matches

by silhas
Tue Oct 29, 2013 3:13 pm
Forum: Getting Started
Topic: Loadcell S9M 2kN into Data logger ADC-24
Replies: 5
Views: 6544

Re: Loadcell S9M 2kN into Data logger ADC-24

Nope, I use Picologg Recorder. The link shows some photos of the wiring and printscreens from the program. You can see the description (voltage range and current load) in the title of the images. The channel currently in use is channel 15 (differential measurement between 15 and 16). http://imgur.co...
by silhas
Mon Oct 28, 2013 4:19 pm
Forum: Getting Started
Topic: Loadcell S9M 2kN into Data logger ADC-24
Replies: 5
Views: 6544

Re: Loadcell S9M 2kN into Data logger ADC-24

Well, you are probably correct so I did some modifications to the wiring diagram. I use a voltage regulator to lower the voltage to 5V, then I use the differential measurement to remove the common voltage. At zero load I get 0 voltage (which is correct), and I then get an increase in voltage as I in...
by silhas
Tue Oct 15, 2013 7:26 am
Forum: Getting Started
Topic: Loadcell S9M 2kN into Data logger ADC-24
Replies: 5
Views: 6544

Loadcell S9M 2kN into Data logger ADC-24

Hello, I've got some problems regarding plugging a loadcell into my data logger ADC-24. The current situation: I got a voltage supply of 24V, a data loader ADC-24 and a force transducer S9M. The force transducer requires a supply voltage between 0.5V to 12V, so I divide the voltage using 2 resistors...
by silhas
Thu Oct 10, 2013 9:58 am
Forum: Getting Started
Topic: Do I need an In-amp?
Replies: 3
Views: 7743

Re: Do I need an In-amp?

Thank you for the respons. Was wondering about the connection between AG of the terminalboard to channel 1, did you ment to say channel 2 instead of channel 1 since channel 2 has the connection to "-" signal output of the cell (according to you previous description). Since I use the powersupply in s...
by silhas
Mon Sep 30, 2013 9:09 am
Forum: Getting Started
Topic: Do I need an In-amp?
Replies: 3
Views: 7743

Do I need an In-amp?

Hi, I'm currently trying to use a ADC-24 with a terminalboard to meassure force, temperature and pressure. In the application and the wiring diagram, a engineer prior to my involvement wanted to use a INA125 Instrumentation amplifier. Since it's not a particularly noisy environment in form of electr...
by silhas
Tue Sep 24, 2013 10:45 am
Forum: Introductions
Topic: Measuring pressure, temperature and force with a ADC-20
Replies: 1
Views: 5166

Measuring pressure, temperature and force with a ADC-20

Hi, I'm currently investigating a hydraulic actuator and I'm trying to set it up in a test rig. Unfortunately I don't have any experience in electrical components and would need some help with how to set everything up. I got a ADC-20 High-Resolution Data Loggers, a terminalboard, a Instrumentation A...