Hello Everyone, First, I have a Picoscope 2204, MI07 logic probe and current clamp. I have a wandboard-dual board and I want to measure the voltage it consumes while booting the board and while running applications. So initially I am measuring the voltage when board boots and then I have some applic...

Since I was not able to attach the image in the last post, I am including it here.

Currently I have connected a breadboard wire between the probe and the mains and I have connected a wire from the probe's ground to the ground on probe. The DC voltage and current value I am getting are ~1.246mA and ~5.2V. The only problem I am having is that I have to keep on holding the wire to gr...

Can anyone please help me?
I am not getting any reply.
It is very urgent.

Yes, that is correct. This graph is mains related. I placed a tip of the probe at mains for testing and placed current clamp on probe to measure the current of the voltage measured by the probe. Basically as I have the voltage plot for the mains shown in the plot, I want to have current plot right b...

Hello Everyone, I am trying to measure the current and voltage on the same screen for iMX6 Sabre SD board. For measuring voltage and current I have PicoScope 2204, MI007(probe) and PP264(60 AC/DC Current Clamp). Now for test run, I connected one end of probe to the scope and was using the head part ...