Search found 5 matches

by vanAsten
Wed Sep 11, 2013 10:27 am
Forum: PicoScope 6 for Windows
Topic: Math channel-alarm-save to .txt file problem
Replies: 9
Views: 2835

Re: Math channel-alarm-save to .txt file problem

Hi Hitesh, I will try the Beta, it might take a few weeks before I have the time to do so though. I am not using any other oscilloscopes at the moment. Meanwhile, do I understand correctly that if the data in my files is interpolated, the reason 20130813-0001 (2).txt only contains 253 samples is bec...
by vanAsten
Wed Aug 28, 2013 1:21 pm
Forum: PicoScope 6 for Windows
Topic: Math channel-alarm-save to .txt file problem
Replies: 9
Views: 2835

Re: Math channel-alarm-save to .txt file problem

Hi Hitesh, Here it is again, although I did not notice anything strange while uploading the psdata file the first time: 20130813-0001 (5).psdata In PicoScope 6 I asked for 50 nanoseconds per division (so -100 nanoseconds to + 400 nanoseconds is expected, pre-trigger is 20%) and I just left the defau...
by vanAsten
Wed Aug 21, 2013 12:57 pm
Forum: PicoScope 6 for Windows
Topic: Math channel-alarm-save to .txt file problem
Replies: 9
Views: 2835

Re: Math channel-alarm-save to .txt file problem

Hi Hitesh, These are the text files resulting from the same measurements the psdata files are from: 20130813-0001 (2).txt 20130813-0001 (5).txt As you can see, the file with math channel A*B turned off contains the complete buffer as was shown on my screen initially, from -104ns to +403.75ns, while ...
by vanAsten
Tue Aug 13, 2013 1:16 pm
Forum: PicoScope 6 for Windows
Topic: Math channel-alarm-save to .txt file problem
Replies: 9
Views: 2835

Re: Math channel-alarm-save to .txt file problem

Hi Hitesh,

Here are the psdata files for the two different measurements:
20130813-0001 (2).psdata
This is the psdata file when I measure with math channel A*B turned on.
(10.84 KiB) Downloaded 169 times
20130813-0001 (5).psdata
This is the psdata file when I measure with math channel A*B turned off.
(10.02 KiB) Downloaded 185 times
Thanks in advance.
by vanAsten
Thu Aug 08, 2013 3:50 pm
Forum: PicoScope 6 for Windows
Topic: Math channel-alarm-save to .txt file problem
Replies: 9
Views: 2835

Math channel-alarm-save to .txt file problem

I use PicoScope 5203 with PicoScope software 6.7.28.7 and Windows XP. I use an external trigger and the data I want to save is in channels A, B and math channel A*B. I use an alarm to save the current buffer to a .txt file on capture. I use Scope Mode and 'repeat' for the trigger with the intent to ...