Thanks

Hi All, I am trying to log two currents and a temperature from a PicoLog 1216 and PicoLog 1000 board. I followed the PicoLog 1000 manual for measuring the current (section 2.5) and have some sensible results from it, I now need to measure a temperature. I am attempting to use a K type thermocouple b...

Hoorah! I am reading a voltage that appears to varying with temp!

Investigation into the K type thermocouple shows it outputting a very low voltage (0.051 mV for example) is this correct as it seems that this voltage could get lost in the noise of the system surroundings ( a Temperature chamber set at various temperatures (sub 0 to 75/80'C). Would this suitable as...

I have now read the documentation and found a K-type thermo-couple wish me luck

Hi All, As the title says I need to measure temperature over a wide range (+65 to -45), I have a bridge wired up with a thermistor and this gives out a voltage between 0 to 3 volts (I am powering off an external supply). Does this sound like the right approach for some one who is not familiar with y...

Found it! I have the manual of the website sorry for wasting time.

Hi All, My company purchased a PicoLog USB data logger in unpacking it the CD with the manual & software was not included. While it is possible to download the PicoLog_r5_22_8 software the manual can not be found on the web site (along with any other software tools that could be of use). The softwar...