Search found 71 matches

by ricardo
Tue Aug 08, 2006 2:17 pm
Forum: Pre-Sales Advice
Topic: Coil on plug probe used for secondary ignition
Replies: 2
Views: 3133

Hi Kevin, The coil on plug probe is not really meant to be used with conventional ignition systems where you have HT leads. For these systems you can just use the ignition pick up leads that clamp on the HT lead. If you really want to use the coil on plug probe with these systems, you can try pointi...
by ricardo
Tue May 23, 2006 10:33 am
Forum: Pre-Sales Advice
Topic: Several measurings on boats at the same time?
Replies: 11
Views: 8213

Hi Trollmann, No, unfortunately with PicoScope (oscilloscope software) you can only use one unit at a time. Also you can only use Pico oscilloscopes with PicoScope. If you must have more than 4 channels then you have 2 options, both will have limitations. Option 1 is to use one of our data loggers (...
by ricardo
Tue May 23, 2006 9:37 am
Forum: Pre-Sales Advice
Topic: Several measurings on boats at the same time?
Replies: 11
Views: 8213

Hi Trollmann,

No unfortunately it is not possible to combine multiple units to obtain more channels, the software is not capable of doing this.

Please let me know if you have any further questions.

Best regards,

Ric
by ricardo
Tue May 23, 2006 8:47 am
Forum: Pre-Sales Advice
Topic: Several measurings on boats at the same time?
Replies: 11
Views: 8213

Hi Trollmann, It sounds like you need one of our automotive diagnostic kits, http://www.picotech.com/auto/automotive_kit.html These come with a 4 channel scope, so you will be able to test 4 things simultaneously also you can use the current clamps to test the load on the different circuits and test...
by ricardo
Mon May 08, 2006 9:45 am
Forum: Pre-Sales Advice
Topic: USB drivers for Linux
Replies: 2
Views: 3392

Hi,

I'm afraid we do not have linux drivers for the 3206. At the moment we only have linux drivers for some of our older serial and parallel port products.

http://www.picotech.com/linux.html

Please let me know if you have any further questions.

Best regards,

Ric
by ricardo
Mon May 08, 2006 9:38 am
Forum: Pre-Sales Advice
Topic: Running two PicoScope 2104
Replies: 3
Views: 4109

Hi mpgreen,

I'm afraid this is not possible, the Pico oscilloscope software will only allow you to use one unit at a time. The only way of doing this will be with a dual channel scope.

Please let me know if you have any further questions.

Best regards,

Ric
by ricardo
Thu May 04, 2006 8:28 am
Forum: Pre-Sales Advice
Topic: 3204 VS ADC 200/100
Replies: 2
Views: 2942

Hi Laurent, Thank you for your enquiry. Here are the main differences, 3204 Bandwidth: 50MHz Max Sampling Rate: 50MS/s Connection to PC: USB2.0 Memory: 256kS Price: £399 ADC200/100 Bandwidth: 50MHz Max Sampling Rate: 100MS/s Connection to PC: Parallel Port Memory: 32kS Price: £499 Please let me kn...
by ricardo
Wed May 03, 2006 9:08 am
Forum: PicoScope 5
Topic: Ranges with 20:1 attenuator
Replies: 1
Views: 3780

Hi Chris, The scaling for the 20:1 attenuator is done using a 'Custom Range'. This custom range is already setup in the Automotive Software, it appears in the voltage range drop down box as '-100 - 400V'. If you get in touch with me directly via email or phone I can help you with your particular nee...
by ricardo
Tue May 02, 2006 10:05 am
Forum: Pre-Sales Advice
Topic: Comparison og PT-100 probes
Replies: 1
Views: 2728

Hi Nicolas, I'm sorry I haven't got back to you sooner. These are the specs I have managed to find out, SE011 uses tolerance class B sensor manufactured to BS EN 60751 : 1996. The figures for class B are +/- 0.12 ohms ( 0.3 C) at 0 C. SE012 uses same sensor but classified as 1/10 DIN which means it ...
by ricardo
Tue May 02, 2006 9:16 am
Forum: Pre-Sales Advice
Topic: recommendation for psu, multi-ch monitoring?
Replies: 5
Views: 4685

Hi Sirdowny, I checked this morning and the most they can increase the input range is to +/-10V, I should also mention that in doing so the input impedance is reduced significantly. I think the best option is to use a potential divider, if you choose sensible size resistors of high accuracy, you sho...
by ricardo
Tue May 02, 2006 8:58 am
Forum: Linux
Topic: PicoScope run under LINUX?
Replies: 23
Views: 57094

Hi Giacomo,

Unfortunately PicoScope only supports Windows. We have Linux drivers for some of our scopes,

http://www.picotech.com/linux.html

but you would need to write your own software.

Best regards,

Ric
by ricardo
Sat Apr 29, 2006 9:37 am
Forum: Pre-Sales Advice
Topic: recommendation for psu, multi-ch monitoring?
Replies: 5
Views: 4685

Thanks for the response Ric. So if I understand correctly, I can use 3 2202s together, but only with the Picolog software and not the Picoscope software. Also I'll be constrained to a max sampling rate of 1 sample/mS. Thats correct. With PicoScope software you cannot use multiple units simultaneous...
by ricardo
Fri Apr 28, 2006 8:54 am
Forum: Pre-Sales Advice
Topic: Picoscope 3206 AWG Capability
Replies: 3
Views: 3539

Hi,

Unfortunately there is nothing we can do about changing the specifications of the signal generator function.

Please let me know if you have any further questions or if you wish to place an order.

Best regards,

Ric
by ricardo
Fri Apr 28, 2006 8:30 am
Forum: Pre-Sales Advice
Topic: recommendation for psu, multi-ch monitoring?
Replies: 5
Views: 4685

Hi sirdowny, Thank you for your enquiry. Using 3 2202 units with PicoLog for logging over a long time is not a problem. The only thing though is that you will not get high sampling rates, the maximum sampling rate with PicoLog is 1 sample per millisecond. This is probably not fast enough to capture ...
by ricardo
Fri Apr 28, 2006 8:14 am
Forum: Pre-Sales Advice
Topic: taking recordings directly for the Th-03
Replies: 1
Views: 2417

Hi Grant,

Thank you for your enquiry, yes you can write your own software for the TH-03. We can supply you with the driver and some example code.

http://www.picotech.com/drivers.html

Please let me know if you have any further questions or if you wish to place an order.

Best regards,

Ric