Is the TA095 compatible with the ADC-20?
If not, is there a way to modify it so that it can be used.
Can you recommend ANY accelerometers that are compatible with this device?

Hi I would like to inquire which accelerometers (industrial accelerometers) are compatible with the Pico ADC-20. I am asking because most industrial accelerometers which I have seen have a single cable for both power and signal purposes. However, the excitation voltage required (to power the sensor)...

I intend using my ADC-20 to record data from 8 accelerometer sensors. The sensors require an excitation voltage of 24V, which I intend to supply using a 24V adapter connected to the mains supply. The output of the sensors are -5 to +5V. I intend to connect two 5k ohm resistors in the potential divid...

If an accelerometer is connected to a data logger such as the the ADC 20, does the sensor need to be powered externally or is it powered by the logger?

I am attempting to set up a condition monitoring system for a shot blast machine in a steel fabrication plant. I decided to use 8 accelerometers to monitor the machine's vibration levels. I intend to use an ADC20 to log the data and transmit it to a pc for further processing such as FFT spectrum ana...