Search found 9 matches

by roastmeat
Mon Aug 19, 2013 3:34 pm
Forum: LabVIEW
Topic: Interval Trigger
Replies: 7
Views: 8796

Re: Interval Trigger

Hi Hitesh, Thanks for the response. A sample rate of above 25MS/s should be appropriate to accurately capture the signal peaks. I have calculated that the smallest time I need to collect data is about 1.6ms after the burst, but I would prefer anywhere around 5-10ms. Only one burst is necessary. Than...
by roastmeat
Thu Aug 15, 2013 6:52 pm
Forum: LabVIEW
Topic: Interval Trigger
Replies: 7
Views: 8796

Re: Interval Trigger

I am playing around with the streaming example and one thing I noticed is that the advanced trigger functions as stated in the PS2000.dll (called via Call Library Function Node) have input parameters not corresponding to the Programmers Manual. For example: ps2000SetPulseWidthQualifier() in Labview ...
by roastmeat
Wed Aug 14, 2013 6:09 pm
Forum: LabVIEW
Topic: Interval Trigger
Replies: 7
Views: 8796

Re: Interval Trigger

Thanks Hitesh, I just found out that I require more data than the scope can handle in block mode, I will have to switch to streaming mode. Do these functions still work in streaming mode? If not, is there another way I can work around this? EDIT: After looking a bit closely at the functions provided...
by roastmeat
Tue Aug 13, 2013 5:16 pm
Forum: LabVIEW
Topic: Interval Trigger
Replies: 7
Views: 8796

Interval Trigger

Hi, I am trying to collect data on the PS 2205 after sending a burst of short pulses (my own hardware). I will be triggering off the transmitted signal (ChB) and collecting data on the received signal (ChA). I need some guidance in the Labview aspect. I found out via the Picoscope software that usin...
by roastmeat
Wed Jul 03, 2013 4:01 pm
Forum: LabVIEW
Topic: Trying to determine frequency
Replies: 1
Views: 3553

Trying to determine frequency

Hi, I am trying to determine frequency using the PS2005 using both channels @ 8064 samples (maximum value looped back to the dll) and a timebase of 1. I have used this process before and it has worked, but on a different application. I basically get the power spectrum and find the highest peak and d...
by roastmeat
Wed Dec 19, 2012 4:51 pm
Forum: LabVIEW
Topic: Getunitinfo
Replies: 1
Views: 3211

Getunitinfo

Hey, I need to get the serial number from the Picoscope 2200 and I have tried using the property node. When the node is run, there is an error 1097, which I believe is because I have not set it up properly. After selecting the dll and get_Unit_Info function, here is how the parameters tab looks: str...
by roastmeat
Wed Nov 28, 2012 10:19 pm
Forum: LabVIEW
Topic: Multiple Picos?
Replies: 3
Views: 4766

Re: Multiple Picos?

Ok thank you.

But I was wondering if there was a renaming system, or a device manager program that can tell you what device is connected and their serial numbers (and possibly change that).
by roastmeat
Tue Nov 27, 2012 3:32 am
Forum: LabVIEW
Topic: Multiple Picos?
Replies: 3
Views: 4766

Multiple Picos?

Hi, I have the 2205 and need to use up to 4 picoscopes on one computer.

I need to know which scope is which as well (like able to determine by serial number?)

Does the API allow this?

Thanks
by roastmeat
Thu Oct 18, 2012 12:27 am
Forum: LabVIEW
Topic: Picoscope Logo
Replies: 1
Views: 3568

Picoscope Logo

Hey,

I am integrating the Picoscope for my company which is part of a larger system.

The problem I have is that everytime I open the unit, the Picoscope logo comes up (with the loading bar).

I would like to know how to remove this,


Picoscope 2205

Thanks