Search found 6 matches

by Schranzy
Wed Sep 12, 2012 11:22 am
Forum: LabVIEW
Topic: control contact of a Relay
Replies: 11
Views: 6367

Re: control contact of a Relay

can we talk over email because it is much more quickly than forum? here is my adress: kaiuwe.bentele@gruner.de
by Schranzy
Wed Sep 12, 2012 9:40 am
Forum: LabVIEW
Topic: control contact of a Relay
Replies: 11
Views: 6367

Re: control contact of a Relay

Sry but the psdata is also to big. What I want to measure is the time between the moment when the blue signal is going to high and the moment when the red signals amplitude is going to 0. And also i have to ensure that the red signal is 0 over the whole time to the next puls from the blue signal. Wh...
by Schranzy
Wed Sep 12, 2012 8:33 am
Forum: LabVIEW
Topic: control contact of a Relay
Replies: 11
Views: 6367

Re: control contact of a Relay

Sorry the psdata is to big to uploading it. But her you can see a picture.

Sample Interval: 1000
Pre-trigger Samples: 0
Post-trigger Sampls: 1000
Down-sample mode: none
Down-Sample Ration: 1
by Schranzy
Wed Sep 12, 2012 6:28 am
Forum: LabVIEW
Topic: control contact of a Relay
Replies: 11
Views: 6367

Re: control contact of a Relay

I had tryed tries sometimes left but something was wrong because the time between these two events is approximately 30ms mesured by PicoScope 6. When I measured the Time with LabView the way you describe it the results are around 200ms. Can you post me some examples or something els?
by Schranzy
Tue Sep 11, 2012 1:20 pm
Forum: LabVIEW
Topic: control contact of a Relay
Replies: 11
Views: 6367

Re: control contact of a Relay

Yes, to see the Stream Data is no problem. At the moment I am displaying the wave with a diagram.
by Schranzy
Mon Sep 10, 2012 1:39 pm
Forum: LabVIEW
Topic: control contact of a Relay
Replies: 11
Views: 6367

control contact of a Relay

I will tell you now the whole problem about the measurement task, maybe you can give me better support. I have to control one contact of a relay, as starting point of the measure I have the digital relay control signal. When the control signal is going to high I should measure the time to the point ...