Search found 43 matches

by davidj
Fri Jun 22, 2007 10:19 am
Forum: Getting Started
Topic: problems using your app.note: "ADC1132" for visual
Replies: 5
Views: 5349

Hi Sorry to hear you are having problems. There are three HW versions of the parallel port ADC11. V1 is the original 10 bit device. V2 and V3 are the new 10 and 12 bit devices respectively and we have been selling these for a long time now. One of the problems with the V1 device is that you cannot t...
by davidj
Thu Jun 21, 2007 4:05 pm
Forum: PicoScope 6 for Windows
Topic: PS 5000 SDK Now available
Replies: 1
Views: 3396

PS 5000 SDK Now available

Please go to http://www.picotech.com/software.html, select a PS5000 and download the Development Kit. The SDK allows you to write your own software or interface to popular third party software packages. The drivers support data streaming functionality, where gap-free continuous data can be streamed ...
by davidj
Fri May 04, 2007 8:06 am
Forum: USB PC Oscilloscopes
Topic: How to plot RMS voltage in time slot in PicoScope6?
Replies: 5
Views: 5254

Hi Naing Thank you for your post. If you are referring to measuring Mains voltage, as supplied to a domestic property, you must use a differential isolating probe such as in our accesory range here: http://accessories.picotech.com/oscilloscope_probes.html Use Picolog, to be able to plot voltage over...
by davidj
Tue Mar 20, 2007 1:06 pm
Forum: General Software Discussions
Topic: Which mode?
Replies: 6
Views: 5227

Hi Please find the below in answer to your question. ok = ps3000_run_streaming(ps3000_handle, 1600, 3200, TRUE); if(ok) { int nSamples = 0; while (nSamples < N_SAMPLES) nSamples = ps3000_get_values(ps3000_handle, (short*) &values_a, NULL, NULL, NULL, NULL, N_SAMPLES); ps3000_stop(ps3000_handle); } T...
by davidj
Fri Mar 09, 2007 11:25 am
Forum: PicoScope 5
Topic: Extended Trigger Delay
Replies: 1
Views: 2296

Hi
Thank you for your post.

Unfortunately, what you are attempting is not currently possible.
by davidj
Wed Feb 28, 2007 5:55 pm
Forum:
Topic: Problem with usage of ADC-40
Replies: 5
Views: 5397

Hi
You are seeing the same problem. The ADC-40 has no on board memory. The USB to parallel adapter would allow streaming and smoother mouse action.
by davidj
Tue Feb 20, 2007 12:36 pm
Forum: LabVIEW
Topic: ETS and oversampling
Replies: 14
Views: 14948

Hi, Please find below response from the driver suppport group. ETS mode will freeze if a trigger isn’t met; it waits indefinitely for a trigger. Since they’re using Ultrasound signals, I presume it’s not a repetitive signal and won’t trigger properly in ETS mode. Oversampling increases the e...
by davidj
Thu Feb 15, 2007 4:24 pm
Forum: Pre-Sales Advice
Topic: direct current vc time
Replies: 1
Views: 2454

Hi
Send in an email with a brief description of what you are trying to do. Attach a saved data file for reference.
by davidj
Thu Feb 15, 2007 4:19 pm
Forum: Pre-Sales Advice
Topic: Standalone
Replies: 1
Views: 2427

Hi

Thank you for your post.

The Environmon system has this capability here - http://www.picotech.com/enviromon.html
by davidj
Thu Feb 08, 2007 11:43 am
Forum:
Topic: Scope for Audio
Replies: 7
Views: 5812

The build information is read out of the firmware and so is conclusive.
Please contact the sales department with your ordering details who with then organise a replacement.
Apologies for the inconvenience.
by davidj
Thu Feb 08, 2007 10:29 am
Forum:
Topic: Scope for Audio
Replies: 7
Views: 5812

Hi
Sorry to hear you are having problems.
If you look at Help/About in Picoscope which will show the model version and build information.
Please check this and report to support@picotech.com or telephone with any queries.
by davidj
Wed Feb 07, 2007 9:43 am
Forum:
Topic: Scope for Audio
Replies: 7
Views: 5812

3224 Bandwidth

Hi

The analogue bandwidth of the 3224 is specified as 10MHz. You might consider the 5000 series as an alterative for the high speed video data capture application you describe. Please see here:
http://www.picotech.com/highperformance ... copes.html
by davidj
Tue Jan 23, 2007 4:39 pm
Forum: PicoLog
Topic: problem with driver
Replies: 7
Views: 5895

Helo Fabien
What is your Pico Device, Version of Pico software and Operating System on your computer ? Please contact support@picotec.com with this information and we will help you out.
by davidj
Tue Jan 23, 2007 4:13 pm
Forum:
Topic: Problem with usage of ADC-40
Replies: 5
Views: 5397

If you are using the XP Operating system, a way round this problem is to use a USB to parallel apapter.
http://www.picotech.com/usb_parallel_port.html

This device was designed in pre-XP days where earlier operating systems handled parallel port communications differently.
by davidj
Tue Jan 23, 2007 4:01 pm
Forum: Pre-Sales Advice
Topic: pt100 without pt104?
Replies: 1
Views: 3252

Hello Ryan

Thanks for the good comments.

We suggest you take a look an an ADC aimed at PT100 / RTD measurements such as this one:

http://tinyurl.com/2jcpqs

see P39. Also a few pages up from this there is some C code which may be of interest.