Search found 6 matches

by Adel
Fri Jun 11, 2010 2:29 am
Forum: USB PC Oscilloscopes
Topic: Printing Ruler Legend Box
Replies: 1
Views: 3065

Printing Ruler Legend Box

I'm using the Picoscope 6 Version 6.4.28.0 and realized that the Ruler Legend Box does not appear on the print anymore. Is there a setting to have it on the print?
Thanks.
by Adel
Tue Nov 07, 2006 1:17 am
Forum:
Topic: 3206 Model - Channel A stuck at 10.7V
Replies: 5
Views: 9219

Thank you Michael. I had bought the unit from Interworld and they made a swap with a new one. My unit has the S/N IAT0/033. When the unit gets back to you, would you please keep me informed on what went wrong, either through this forum/topic or to my email?
Regards.
by Adel
Fri Nov 03, 2006 3:00 am
Forum:
Topic: 3206 Model - Channel A stuck at 10.7V
Replies: 5
Views: 9219

Channel A stuck at 10.7V

Hello Michael, Thank you for your prompt answer, I will send the unit for repair. I checked in the previous discussions and forums, and the same case of channel A freezing appeared on some occasions. Is this a hardware problem that need to be fixed? It would reassuring to know what exactly is causin...
by Adel
Wed Nov 01, 2006 7:40 pm
Forum:
Topic: 3206 Model - Channel A stuck at 10.7V
Replies: 5
Views: 9219

3206 Model - Channel A stuck at 10.7V

Today when I plugged my 3206 Channel A is showing 10.7V (no probe, no input to it). Could you please advise what is going on, is there a reset to this situation?
Thank you.
by Adel
Fri Sep 15, 2006 11:25 pm
Forum:
Topic: 3206 and 200MHz frequency
Replies: 2
Views: 6612

Thank you Alan. Yes indeed with the Trigger set to ETS the wave form is much lik a sine wave and I was able to get as high as 188MHz, with a frequency measurement fairly acurate.
Regards.
by Adel
Wed Sep 13, 2006 6:30 pm
Forum:
Topic: 3206 and 200MHz frequency
Replies: 2
Views: 6612

3206 and 200MHz frequency

I just purchased a 3206 model and the following could be my lack of knowledge of the scope and/or the software. I connect a CW to Channel A of the scope, input from my Signal Generator at -10dBm, at frequencies between 75MHz and 200MHz. The shape detected by the scope is anything but a sinewave and ...