Hello, Michael

Thank you for your answer. could you give some hints/details about the custom application? Is it possible that a Labview program can record data from ADC11 and COM1 at the same time? Do you have some similar examples that we can refer? Thanks.

Best regards,
Maverick

Hi, I used ADC11-10 and Picolog R.16 version, real-time continuous mode with sample rate=100ms, scan time=20000us. I met a quite strange problem, when I scaling the load cell voltage to physical units(force in Newton) using scaling function in Picolog while recording that load cell voltage at the sa...

Hi,

I need to integrate a digital signal from COM1 with three signals from ADC11-10, i.e., I need to record those 4 signals at the same time(one from COM1, three from ADC11-10). How it can be done? Could it be done with Picolog?

Thanks.

Best regards,
Maverick

Hi, I met two problems as follows(Use ADC11-10 with real time continous m): (1) How to set the scan time in Picolog? In the user manual it states "scan time is the total time to take the set of readings for a sample. The scan time should be at least three cycles at the min frequency that you wish to...