Search found 17 matches

by PaulF
Mon Jul 03, 2023 9:25 am
Forum: PicoLog
Topic: Picolog out of range
Replies: 1
Views: 916

Picolog out of range

I am currently running Picolog 6.2.8, when channels inputs are zero, it displays 'out of range' and a blank field is recorded in the table. It also did this in 6.2.7 but displayed correctly as zero in 6.2.5. Any ideas?
by PaulF
Tue Jun 27, 2023 10:36 am
Forum: PicoLog
Topic: PicoLog I cloud
Replies: 0
Views: 9092

PicoLog I cloud

Does anyone know what the refresh rate of data to the iCloud is? I have a logging session running which is recording data at 1 second intervals but when viewed remotely the data only refreshes approx every 30 seconds. Is this a limitation?
by PaulF
Tue Jul 17, 2018 2:44 pm
Forum: PicoLog
Topic: Frequency input
Replies: 2
Views: 3874

Re: Frequency input

Hi Hitesh,
We are using the Pico 1216. Among other signals we have anemometers which have a frequency output. We will have to revert to Picolog 5.
Thanks
by PaulF
Mon Jul 09, 2018 11:36 am
Forum: PicoLog
Topic: Frequency input
Replies: 2
Views: 3874

Frequency input

I've just updated from Picolog 5 to the latest Picolog 6 & can't see anywhere to set the channel input to frequency, I am probably just missing something since the user interface looks totally different. Can anyone point me in the right direction.
by PaulF
Wed Jan 20, 2010 12:07 pm
Forum: PicoLog
Topic: PicoLog sample time
Replies: 8
Views: 11428

PicoLog sample time

I am using a PicoLog 1012 with PicoLog R 5.20.9. With a Sample interval of 5 minutes, as many samples as possible & 288 samples this should be a total period of 24 hours, this run actually completes in 22 Hrs 54 minutes. A sample interval of 1 second, as many samples as possible & 3600 samples compl...
by PaulF
Thu Nov 26, 2009 3:48 pm
Forum: PicoLog
Topic: PicoLog over IP network
Replies: 1
Views: 3530

PicoLog over IP network

I have been using PicoLog for many years & sending data over a network using a parallel port ADC11, this has worked without a problem. I have just upgraded the hardware on the server to a PicoLog 1012 & the latest software 5.20.9 on both server & client. I now just get an error to say 'No response f...
by PaulF
Tue Sep 29, 2009 10:10 am
Forum: PicoLog
Topic: PicoLog settings file
Replies: 1
Views: 3679

PicoLog settings file

I am using PicoLog 5.20.6 together with a 1012. I have used the software & hardware going back to DOS days so thought I was reasonably ok with it but recently a couple of things have been giving me some grief which have not done previously. 1. Where does picolog store settings for loading when it is...
by PaulF
Fri May 29, 2009 8:00 am
Forum: PicoLog
Topic: PicoLog with 1000 series
Replies: 1
Views: 3708

PicoLog with 1000 series

I have just recieved a PicoLog 1000 series & when checking the Pico website for any later revisions of software I noticed the software revisions supplied are: PicoLog 5.20.6, PicoScope 5.20.6 & 6.2.4 but on the Pico website it states that the latest versions are PicoLog 5.20.3, PicoScope 5.20.3 & 6....
by PaulF
Thu May 01, 2008 9:21 am
Forum: Hardware
Topic: Latest Software with old hardware
Replies: 1
Views: 13374

Latest Software with old hardware

I have just dusted off an Enviromon system consisting of EL005 Data logger + EL016 voltage converter, which has not been used for several years, I downloaded & installed the latest software but when I try to configure the converter I get a message ' Philips chip - Contact Pico'.
by PaulF
Thu Jan 03, 2008 10:27 am
Forum: PicoLog
Topic: Picolog frequency measurement problem
Replies: 9
Views: 12933

Thanks Ziko, Sorry for the long delay in replying, been tied up with other things. Pressing record does give me the frequency display. The problem now is that most of the time the recorder needs to display the readings without recording. This was possible in the older software revisions but not in t...
by PaulF
Fri Dec 14, 2007 2:01 pm
Forum: PicoLog
Topic: Picolog frequency measurement problem
Replies: 9
Views: 12933

Hi Ziko, Sorry, none of this works. I had already tried 100ms scan time. The 1sec sampling rate in my setup file was only what I had ended up with after trying lots of different values & input frequencies. I tried altering the plw.ini file as you suggested but the problem is still the same - no freq...
by PaulF
Thu Dec 13, 2007 12:45 pm
Forum: PicoLog
Topic: Picolog frequency measurement problem
Replies: 9
Views: 12933

Picolog frequency measurement problem

Hi Ziko, Thanks for the reply. Yes I know about the relationship between scan rate & frequency. I have tried various scan rates & frequencies. The setup file I sent was using an input frequency of 1kHz with a scan rate of 1s. Both of these I varied over a wide range. I don't understand how it can wo...
by PaulF
Wed Dec 12, 2007 5:07 pm
Forum: PicoLog
Topic: Picolog frequency measurement problem
Replies: 9
Views: 12933

Picolog frequency measurement problem

Hi Ziko, The signal I am actually trying to measure is from an anemometer so is low frequency up to about 50Hz. We have been doing this for many years via the parallel ADC-11 & the USB ADC-11 up to rev 5.13.9. As a simple test I set up 1 channel with the measurement type as Frequency & scan time I h...
by PaulF
Tue Dec 11, 2007 5:20 pm
Forum: PicoLog
Topic: Picolog frequency measurement problem
Replies: 9
Views: 12933

Picolog frequency measurement problem

I have posted on this problem before but have had no resolution to date. I cannot get the ADC-11/10 USB to display Frequency when used with a software version later than 5.13.9. It works fine with 5.13.9 or with this & later versions using the ADC-11/10 parallel port device. I have tried with inputs...
by PaulF
Tue Feb 27, 2007 4:13 pm
Forum: PicoLog
Topic: Picolog frequency measurement problem
Replies: 3
Views: 6590

Picolog frequency measurement problem

Thanks for the reply. I just set up one input channel with measurement as frequency & input a square wave of 2.5v of varying frequency from a signal generator into the corresponding channel, I have verified the signal & frequency with Picoscope but with picolog 5.15.6 I get a reading of 0Hz. If I un...