Thanks... i found it... it was the probe:

http://accessories.picotech.com/oscillo ... robes.html

I have to set it at x10 and everything is ok

By the way, I use a MI103 250MHz probe, so this shouldn't be the problem.

Hello, I'm trying to measure rise times using 3206 from 5V digital signals. The best rise time (10% to 90%) i get is about 35ns. My problem is that i'm measuring devices that should perform at about 10ns. Is this a limitation of 3206? Theoretically an analog oscilloscope should have about 0.35/BW, w...

Thanks for your answer. But you only aswered me partially: Is the protocol that PicoScope 3206 uses available in order to write one if we wish?

TIA,

Josep

I'm also interested in driver availability to process data from MATLAB.

TIA

Josep

Hello,

I'm interested in buying a PicoScope 3205 or a PicoScope 3206 and I'd like to know if the bandwith, realtime sampling freq., and memory storage for channel remain the same as specified if we capture data at once from both channels.

TIA,

Josep

I'm interested in buying a PicoScope 3205 or a PicoScope 3206 for our company and I'd like to know if we can test the product before buying or if you have a distributor in Spain (we are in Barcelona) in order to request a demo.

TIA,

Josep

Hello I'm interested in buying a PicoScope 3205 or a PicoScope 3206 and I'd like to know if: * there are drivers for the device on Linux * there is a Linux version of the software supported * availability of the documentation on the protocol of communication to the device over USB to be able to prog...

Hello,

I'm interested in PicoScope 3205 or PicoScope 2306 DSO models, and I see in your web site that third party software like LabView is supported. Are drivers included or is this an option?

TIA,

Josep