Thank you Ziko.

I going to try to work in this subject and then I will send back you details.

Have a good day!

Ariel

HI to everybody,
I want to know if it is possible run picoscope 5 or 6 under Linux (Ubuntu karmic-koala) 64b and How install it.

I wil appreciate your reply.

Ariel

Hello: I´ve used ADC 212/50 Scope with the USB PP1 adapter without problem since Feb 2008. Suddenly, a message appears showing " ADC 212 not connected". Then I notice that the red led is off at USB PP1 device. I tested the Adc 212/50 via parallel cable on a old PC under W98. The wrong message appear...

Hi Mark, Thank you for your reply. Following your advice, I ´ve downloaded the new version 5.18.0. However there is a problem when I use single trigger. If I use AUTO there is no problem. Also I reduced the number of samples but the the result is the same. Changing the trigger from single to auto a...

Hi

Any help would be very grateful!!


Thaks

Ariel

Hi Ziko

I am waiting for your reply!

Good year!


Ariel

Hi,Ziko Thank you for your reply. I know how this tool works, but when I capture one trace on the 2nd screen, the first one disappear and the composite screen shows only one trace. Remember I use single trigger mode. I think this tool does not work with this trigg mode. Thank you and regards, Ariel

Hi:

When I use "Freeze/thaw one" and composite tool I can´t see the captured traces at the same screen.
I am working with single mode and only a channel.

Could you help me?

I use 5.16.12 PS ver and a adc212/50 and a 3204 too

Thank you and regards,

Ariel

Hi: I want to know how can I see several traces on the same channel using PS 6, 6.0.11.2 and a 3204 Scope. That is, differents oscillograms captured in SINGLE trigger. Whit older version I use "Freeze/thaw one" and composite tool , but now I don´t know what to do. Could you help me? Thank you and r...

Hi Alan

Your suggestion is very ingenious!!!!

Thank you.


Ariel.

David:
Thank you for your post.

Regards,

Ariel.

Is possible to use math functions with chA and chB?

CHA + CHB
CHA * CHB
Invert a channel ..

Thanks,

Ariel.

Thak you Sarah.

Best Regards

Ariel

I want to know if I can trigg the Ps 3205 in Ext Mode with a sinusoidal wave (3V), from mains using a insolater transformer. This is to see pulses that appears every 50 hz (20mseg). If I trigg the scope with ChA or ChB in auto- rising, with low signal (100mV) the trigger is too poor. Sometimes trigg...

Thank you Michael,

Please send me an e-mail when the revision is updated.


Ariel