Search found 4445 matches

by Martyn
Fri Feb 23, 2024 1:25 pm
Forum: LabVIEW
Topic: Pico 2000A Timing and sampling settings
Replies: 1
Views: 25

Re: Pico 2000A Timing and sampling settings

If you look at the Scope button on the top of the display you will see Samples 125 (1290), PicoScope 7 is only collecting 125 samples, but the softare is using sin(x)/x interpolation to bump this up to 1290 which is why you are seeing the ripple. If you are using the same sampling settings as PicoSc...
by Martyn
Mon Feb 19, 2024 1:08 pm
Forum: .Net Languages (C#, VB.Net, .)
Topic: Data Reading Errors Encountered During Software Development Using Visual Studio
Replies: 5
Views: 110

Re: Data Reading Errors Encountered During Software Development Using Visual Studio

Please post your code and use the code button ( < / > ) to help format it, or add it as a file.
by Martyn
Mon Feb 19, 2024 11:53 am
Forum: .Net Languages (C#, VB.Net, .)
Topic: Data Reading Errors Encountered During Software Development Using Visual Studio
Replies: 5
Views: 110

Re: Data Reading Errors Encountered During Software Development Using Visual Studio

The Pk to Pk voltage looks like 1.25V which is half of the signal generator voltage. The generator is probably specified to output the 5V into an open circuit, but as you are connecting to a 1MOhm input impedance scope and you have the generator set to high impedance, you have a 1MOhm + 1MOhm voltag...
by Martyn
Mon Feb 19, 2024 7:13 am
Forum: General Software Discussions
Topic: Pulse width triggering using V2 advanced trigger functions
Replies: 6
Views: 1010

Re: Pulse width triggering using V2 advanced trigger functions

The section at line 86 is wrong, as it is setting the PulseWidth when it should set the Channel, PulseWidth is set correctly in the section at line 112, # Set channel A direction as rising and level num_directions = 1 ChannelDirection = ps.PS5000A_DIRECTION( ps.PS5000A_CHANNEL["PS5000A_CHANNEL_A"], ...
by Martyn
Fri Feb 16, 2024 9:04 am
Forum: Introductions
Topic: SDK Configuration
Replies: 6
Views: 5746

Re: SDK Configuration

The Python examples and instructions for controlling PicoScopes can be found here
https://github.com/picotech/picosdk-pyt ... /README.md

you will need to find extra content from other sources to control the Arduino and then combine these into a single program.
by Martyn
Fri Feb 16, 2024 8:53 am
Forum: General Software Discussions
Topic: Pulse width triggering using V2 advanced trigger functions
Replies: 6
Views: 1010

Re: Pulse width triggering using V2 advanced trigger functions

The pulse width type enums can be found here https://github.com/picotech/picosdk-python-wrappers/blob/master/picosdk/PicoDeviceEnums.py For a simple pulse width trigger Channel Properties for Channel A to the voltage and hysteresis required with mode Level Channel Conditions for Channel A need to be...
by Martyn
Fri Feb 09, 2024 6:49 am
Forum: PicoScope 7 for Windows, Linux and Mac
Topic: picoscope 7 download
Replies: 1
Views: 516

Re: picoscope 7 download

Please email support@picotech.com with exact details and screenshots of the errors you are seeing, the locationwhere you downloaded the software from, the version of the software, and what PC and O/S you are installing on with details of any virus software you are running.
by Martyn
Wed Feb 07, 2024 8:01 am
Forum: PicoScope 7 for Windows, Linux and Mac
Topic: Problem with AWG on 2406B - Frequency and Amplitude don't Match Settings
Replies: 1
Views: 527

Re: Problem with AWG on 2406B - Frequency and Amplitude don't Match Settings

The key is that you have selected 10 cycles in the AWG buffer design. The frequency is for the whole buffer, not per cycle. You can either change the generator frequency to 10Hz you will get 10 cycles at 10Hz, so the square wave frequency will be back to 100Hz, or you can select 1 cycle in the AWG b...
by Martyn
Sun Feb 04, 2024 8:27 am
Forum: USB PC Oscilloscopes
Topic: 2206B (50MHz bandwidth) - can I sample a 10Mhz digital clock?
Replies: 1
Views: 342

Re: 2206B (50MHz bandwidth) - can I sample a 10Mhz digital clock?

Can you post a pasta file showing what you are seeing.
by Martyn
Fri Feb 02, 2024 2:31 pm
Forum: PicoScope 7 for Windows, Linux and Mac
Topic: Signal generator in Picoscope7
Replies: 1
Views: 481

Re: Signal generator in Picoscope7

If you have a scope attached that has a Generator then the option can be found here
Generator.png
If you are running demo mode then it is not possible to change the signals.
by Martyn
Wed Jan 31, 2024 11:42 am
Forum: PicoLog
Topic: Thumbs up for a pleasant experience at last
Replies: 1
Views: 557

Re: Thumbs up for a pleasant experience at last

Device specific setup for PicoLog 6 can be found in the User Guides TC08 https://www.picotech.com/download/datasheets/tc-08-thermocouple-data-logger-users-guide.pdf PT104 https://www.picotech.com/download/manuals/pt-104-prt-data-logger-users-guide.pdf CM3 https://www.picotech.com/download/datasheets...
by Martyn
Fri Jan 26, 2024 7:52 am
Forum: PicoLog
Topic: Picolog6 so slow to start up
Replies: 1
Views: 578

Re: Picolog6 so slow to start up

You need to be using the reset button at the top of the window ResetDataorConfiguration.png Chose "Reset data" if you wish to keep the same device settings, or chose "Reset configuration" if you want to set all devices from scratch. There are various pop ups in the application that have a "Don't Sho...
by Martyn
Tue Jan 23, 2024 7:56 am
Forum: PicoScope 7 for Windows, Linux and Mac
Topic: Measurement logging add sample rate to the function
Replies: 1
Views: 39431

Re: Measurement logging add sample rate to the function

Measurement logging is a new feature in PicoScope 7, and we are encouraging user feedback so that we can make improvements. Your comments are most welcome and the relevant teams have been maded aware of them.
by Martyn
Mon Jan 22, 2024 11:21 am
Forum: Getting Started
Topic: Auxiliary trigger
Replies: 1
Views: 919

Re: Auxiliary trigger

Which PicoScope Model are you referring to?
by Martyn
Fri Jan 19, 2024 10:18 am
Forum: RF Products
Topic: Sampling Picoscope 9211A, still good in 2024 ? (advice required vs used item on sale)
Replies: 1
Views: 1048

Re: Sampling Picoscope 9211A, still good in 2024 ? (advice required vs used item on sale)

If you can find out the serial number of the PicoScope 9211A and send the details in to support@picotech.com someone canlook into this for you.