Please repost to our dedicated Automotive Forum
https://www.picoauto.com/support/index.php

Please check these three sections in the software Maths_and_Measurements.png and the articles on our website https://www.picotech.com/library/knowledge-bases/oscilloscopes/maths-and-measurements New Maths and Measurements are being added on a regular basis so it is worth checking the latest Early ...

Have you tried using the Quadrature Serial Decoder?

Are you writing your own application? if yes what language are you using? or are you using our PicoScope 7 software?

I will then be able to give you the answer you need.

You need to set the probe up as PICO_CONNECT_PROBE_CURRENT_CLAMP_200_2KA as this will provide the power to the clamp and then chose a range as one of PICO_CURRENT_CLAMP_200A_2kA_1A = 4000, PICO_CURRENT_CLAMP_200A_2kA_2A, PICO_CURRENT_CLAMP_200A_2kA_5A, PICO_CURRENT_CLAMP_200A_2kA_10A, PICO_CURRENT ...

Yes the PicoScope 2204a will work with PicoScope 6 software.

When you setup your PC did you follow all of the steps in

https://github.com/picotech/picosdk-ni- ... /README.md

are you running the PicoScope 7 software, if so close this down and repeat your test.

For your device you will need these examples
https://github.com/picotech/picosdk-ni- ... er/ps6000a

Have you followed the steps here
https://github.com/picotech/picosdk-pyt ... /README.md

Once you have completed the steps the examples for the 5443D can be found here
https://github.com/picotech/picosdk-pyt ... 0aExamples

This is for a PT104 but the same applies for the CMS. Open PicoLog 6 and then on the picture of the device clcik the 3 dots, and then select Device Information which will bring up the following panel where you can set up the ethernet address for the CM3 Ethernet Setup.png Chose an address and port ...

This will need some detailed discussions to work out what functionality you are using with the PicoScope 6402C as both devices will need to use their own API interface. Can I ask that you email the support team directly on support@picotech.com with further details including the programming language ...

We haven't implemented the Command Line Interface for PicoScope 7 yet, however we have provided the ability to log measurements directly to a csv file https://www.picotech.com/library/oscill ... asurements

This occurs when the number of samples across the screen drops below 2000 and the software switches on sin(x)/x interpolation which you will see in the Timebase button with the number of samples in a bracket. This has been reported to the development team. The work around is to use a Maths Channel ...

The trigger type Repeat name was changed to Normal in version 7.1.31

If you try changing the trigger type from Repeat back to None, then back to Repeat do you see the option to select Channel B in the trigger menu?

Please note that you shouldn't use a standard x10 probe to measure mains voltages.