The PicoScope 2204a is not supported in the Automotive Software, you need to download the T&M version of PicoScope from the download page linked at the top of this page.

There will be gaps in data collection between the 40 waveforms so it would not make sense to stitch them together.

Which device do you have?
Can you post screen shots showing this effect, and possible a psdata file and a picolog file so we can see the setup of the software.

I expect that the issue will be the much slower sampling speed of PicoLog compared with PicoScope.

We have a feature request in for this to be added. In the meantime there is a workaround that can give this value using measurements. If you add a measurement for "Maximum" select "Between rulers", then place the time rulers close to each other and lock them you will get the value at the rulers. Now...

Can you confirm the version of the software you are using, and which Operating System you have.

Which version of the software are you using?

When I switch from Scope to Peristence and back again in the Instruments panel the settings persist.

Can you provide some example code that shows this issue?

You can either post it here or send it directly to the team support@picotech.com

Customer reported under a different forum topic that they were using ps5000 and not ps5000a code.

It is mentioned in the device specifications https://www.picotech.com/oscilloscope/5 ... ifications

I would expect the reason you are not seeing ETS is that you have the hardware resolution set to 12 bit or higher. ETS is only available in 8 bit mode.

Graphing all channels would have been the default setup, although you can split channels across four different axes, so that may be where you recollection of four came from. I will feed back your comments about a bar graph display, sounds an interesting idea, but I can't guarantee if or when it woul...

This will be due to the digital scaling applied to all the values returned from the scope. This digital scaling is necessary to ensure that when a fixed value of say 1V is present at the input of the scope that the software will report this as 1V. The values used for digital scaling are calculated d...

If you remove the resolution enhancement so that you are seeing raw values, you will see that every trigger is actually at the same value of 471.2mV as shown by the masurement I have added which is maximum between rulers. TriggerPoint.png this applies to the buffers you mentioned but also ones which...

The scope only contains software to manage the loading of the actual running image, it does not retain this after it is powered down. This image file is contained in the dll and loaded into the scope when you issue the Open command in your own application, or when you start the PicoScope application...

Can you post psdata files showing what you mean, then we can see the actual data and the setup of the scope and software.