Which PicoScope device do you have ?

Or look at the BNC (not BNC+) leads here https://www.picoauto.com/products/acces ... test-leads

Your device uses the ps5000a driver so you need to look at the ps5000a examples

https://github.com/picotech/picosdk-pyt ... 0aExamples

There will be a gap in the collected data between the two buffers, so if you really need to see what is happening you will have to run the data collection again with more time across the screen.

You just need a modern PC or Laptop (Windows, Linux or Mac) with the current or previous release of the O/S and then install and run the PicoScope 7 software from

https://www.picotech.com/downloads

If you consider the triangle as a pulse you coukd use a Windows Pulse Width trigger with the condition greater than the noirmal value as the flat spots will extend this time.

Can you post a psdata file showing your SENT data, as collected with the PicoScope software, and what is happening with the decoder. SDK based applications allow you to setup the scope and collect data, they do not provide tools to decode or process the data you have collected so you would need to c...

Can you try using the .Net repair tool from Microsoft

https://learn.microsoft.com/en-us/dotne ... all/repair

We will need some more information to understand the issue :- Please post a screen shot showing the gaps in the data How frequent are the gaps and how long do they last? Is the PicoLog 6 software open and running when the trace drawing stops temporarily? Are there any other applications running on t...

PicoLog would be useful for logging the values of slow changing signals over time. However if you are wanting to save the calculated measurements that are performed on the traces it would depend upon the measurements you need to save, the speeds of the signals, and the timeframe over which to do thi...

You will need the 32bit SDK https://www.picotech.com/download/softw ... 24.276.exe and make sure that the PicoScope 6 or PicoScope 7 application is not running at the same time.

Which PicoScope model do you have?

Please contact support@picotech.com for this information

Is there a trace.xml file in a folder at C:\Users\{YourWindowsLogin}\AppData\Local\Pico Technology if there is please send this into support@picotech.com before deleting the whole folder and restarting the application which can fix non start issues in some instances. Can you confirm what graphics ad...

By default there is a trigger enabled at the middle of the screen.
Click on the button at the top of the screen that says trigger and then in the panel set the mode to None

You will need to update to the latest version of PicoScope 6 (6.14.68) and the PicoSDK (10.7.24) from our website https://www.picotech.com/downloads These versions will work with both old and new batches of the PicoScope 4824A.