Search found 656 matches

by Michael
Wed Nov 29, 2006 9:34 am
Forum: Hardware
Topic: sampling speed
Replies: 6
Views: 7799

Hello,

You will need to email support@picotech.com

Please outline your exact requirements in your email and we will be able to help you.

Best regards,
Michael
by Michael
Wed Nov 29, 2006 9:29 am
Forum: PicoScope 5
Topic: FFT and Cross Corellation
Replies: 1
Views: 2301

Hello Criss,

Thank you for your post.

The 3224 fft function will allow you to view a 10MHz bandwidth with 4096 increments.

The software will allow you to view one or tw channels at once in the same FFT window.

Best regards,
Michael
by Michael
Tue Nov 28, 2006 11:57 am
Forum: General Software Discussions
Topic: ADc_count
Replies: 1
Views: 2448

Hello, The set trigger function will work to the settings of the active channel chosen as the trigger source. So ChA set at ±20v will set the ADC count on the set trigger function to ±20v. THe set timebase function only asks for one variable from you. YOu will need to declare the sample time as a ...
by Michael
Tue Nov 28, 2006 11:33 am
Forum: Hardware
Topic: envimon.ini
Replies: 3
Views: 4965

Hello,

YOu need to configure the logger before an INI file will be created.

You cannot progress beyond this point wihout doing this.

Best regards,
Michael
by Michael
Tue Nov 28, 2006 11:30 am
Forum: Hardware
Topic: sampling speed
Replies: 6
Views: 7799

Hello,
YOu would need to consider a different product such as the ADC11.

Please check our website for futher information.

Best regards,
Michael
by Michael
Tue Nov 28, 2006 11:28 am
Forum:
Topic: DrDAQ and DD100 temperature sensor scaling
Replies: 1
Views: 3004

Hello,

The scaling of the temperature readings is managed by the software. You can use the scaled input options to add calibration points to the software if you need to.

Please check the manual for further details.

Best regards,
Michael
by Michael
Tue Nov 28, 2006 11:24 am
Forum:
Topic: DrDAQ pH sensor
Replies: 1
Views: 3012

Hello,

Can you confirm you are using the most recent software and drivers. Please check and download from www.picotech.com/software.html

Best regards,
Michael
by Michael
Tue Nov 28, 2006 9:55 am
Forum: PicoLog
Topic: Zero Values Displayed in Spreadsheet
Replies: 7
Views: 5907

Hello,

It sounds like the ADC11 is returning a short number of samples in the block. YOu will need to increase the number of samples in the block sample to get more samples in the spreadsheet.

Best regards,
Michael
by Michael
Tue Nov 28, 2006 9:50 am
Forum: PicoLog
Topic: drdaq light sensor
Replies: 1
Views: 2369

Hello,

We need a bit more information regarding this. What version of PicoLog are you using and are you enabling the light sensor channel?

Best regards,
Michael
by Michael
Tue Nov 28, 2006 9:42 am
Forum: PicoScope 5
Topic: Problem with oversampling with the Pico3424 units
Replies: 2
Views: 3017

Hello, Thank you for your post. Oversampling must be understood to implement it correctly. Your oversample factor of two will half the sampling rate and buffer memory and increase the effective resolution by 0.5 bits. Oversample factor 4 will quarter the sampling rate and buffer memory and increase ...
by Michael
Tue Nov 28, 2006 9:37 am
Forum: PicoScope 5
Topic: PS 3205, LabView 8.0
Replies: 7
Views: 5848

Hello Scott,

As far as I am aware, you will be able to open and run our VI's without the full professional version. We use the base development version as we do not require the run time licences.

I am sure a quick call to NI will answer the quesiton for certain.

Best regards,
Michael
by Michael
Mon Nov 27, 2006 12:41 pm
Forum: PicoScope 5
Topic: problem with usb-port for picoscope
Replies: 1
Views: 2837

Hello and thank you for your post.

You will need to download the latest version of our software from our website. Please visit: www.picotech.com/software.html

Best regards,
Michael
by Michael
Mon Nov 27, 2006 12:40 pm
Forum: PicoScope 5
Topic: Running two windows of PicoScope simultaneously
Replies: 1
Views: 2270

Hello,

THank you for your post.

Unfortunately, PicoScope will only run in one instance on your PC. If you want to open multiple units, you will need to open PicoLog or write your own specific applications using the provided drivers.

Best regards,
Michael
by Michael
Mon Nov 27, 2006 12:19 pm
Forum: PicoScope 5
Topic: PS 3205, LabView 8.0
Replies: 7
Views: 5848

Hello Scott,

I have sent some LV examples to you via your private email address.

Best regards,
Michael
by Michael
Fri Nov 24, 2006 12:58 pm
Forum: Getting Started
Topic: cannot use ADC-20 in picoscope
Replies: 4
Views: 4851

Hello Jason,

Thank you for your post.

What is your application and how did you intend to use PicoScope for this purpose? It may be that we did not fully undersatand your requirements and offered the ADC20 as the wrong solution.

Best regards,
Michael