Please see our website, to compare specifications and prices

http://www.picotech.com/oscilloscope-sp ... tions.html

If it works ok using Picoscope6, check that the C# application is using the same ps4000.dll. If it is, and it still doesn't work, please email support@picotech.com to arrange checking of the device. MaxValue = 32764 for the 4000 series scopes. The C# code has been modified, and ps4000.c has fp is in...

Yes, you can trigger on the external signal. To amend the C# example in the SDK... Imports.TriggerConditions[] conditions = new Imports.TriggerConditions[] { new Imports.TriggerConditions(Imports.TriggerState.DontCare, Imports.TriggerState.DontCare, Imports.TriggerState.DontCare, Imports.TriggerStat...

The scope will work on timebase 0 if only 1 channel is enabled.

Channels are enabled by default, so you need to turn off the channel you're not using.

-Chris.

I'm afraid we don't have any matlab examples for this scope.

If you implement the code above, samples will be collected indefinatey without stopping.

You need to use the AutoStopped function in the ps3000aWrap.dll (Note, in vb.net a long is a 64 bit number, whereas when the documentation refers to a long, it is a 32 bit number, therefore, use interger in place of long, UInteger in place of unsigned long) Declare Function IsReady Lib "ps3000awrap....

Channels are enabled by default, so you need to explicitly turn them off.

In the settings.vi, make sure the four channel device is enabled, and Channel B, Channel C & Channel D settings are not enabled.

The timebase value in the ExampleBlock.vi can then be set to 0.

We are not able to save the examples in a format copatible with v7.1.

You can download a free 30 day trial of the latest labview version

http://www.ni.com/trylabview/

and use it to see how the example code works, then port this back to your 7.1 version.

We are not able to save the examples in a format copatible with v7.1.

You can download a free 30 day trial of the latest labview version

http://www.ni.com/trylabview/

and use it to see how the example code works, then port this back to your 7.1 version.

We are not able to save the examples in a format copatible with v7.1.

You can download a free 30 day trial of the latest labview version

http://www.ni.com/trylabview/

and use it to see how the example code works, then port this back to your 7.1 version.

pl1000bc.lib will be included in the next sdk release. > sdk_r10_1_0_17

We have no plans to release 64 bit drivers at this time.

PSData files are only used for the PicoScope6 application.

If you need an initialisation file, you will have to create this yourself in your application.

A C# example will be included in the next SDK release ( > 10.1.0.17 )