1000 traces quickly. The total trace length is 500 ns and there are only 125 samples. I am using the latest version of PiecoScope 6 under Windows 10 with a 5244B scope.
Test and Measurement Forum
Rapid Trigger Mode 10 Waveform Limit
2 posts
• Page 1 of 1
Rapid Trigger Mode 10 Waveform Limit
by nf6z » Wed Feb 22, 2017 9:05 pm
When I set trigger mode to rapid, only 10 waveforms can be collected. I want to get an average measurement from 1000 traces quickly. The total trace length is 500 ns and there are only 125 samples. I am using the latest version of PiecoScope 6 under Windows 10 with a 5244B scope.
1000 traces quickly. The total trace length is 500 ns and there are only 125 samples. I am using the latest version of PiecoScope 6 under Windows 10 with a 5244B scope.- nf6z
- Newbie
- Posts: 0
- Joined: Thu Feb 02, 2017 8:21 am
Re: Rapid Trigger Mode 10 Waveform Limit
by Martyn » Thu Feb 23, 2017 6:52 am
By default the rapid capture is set to 10 in the trigger toolbar, try this file
which is set up how you have requested.
rapid1000.psdata- 1000 waveform rapid capture
- (225.54 KiB) Downloaded 56 times
which is set up how you have requested.
Martyn
Technical Support Manager
Technical Support Manager
- Martyn
- Site Admin
- Posts: 2970
- Joined: Fri Jun 10, 2011 8:15 am
- Location: St. Neots
2 posts
• Page 1 of 1
Return to PicoScope 6 for Windows
Who is online
Users browsing this forum: No registered users and 2 guests
