ADC - 24 Digital outputs not working

Post your LabVIEW discussions here
Post Reply
TSmart
Newbie
Posts: 0
Joined: Tue Feb 21, 2017 4:19 am

ADC - 24 Digital outputs not working

Post by TSmart »

Hi,
I have recently switched using PicoLog 1216 to an ADC-24 and have been having trouble operating the digital outputs of the logger. No errors appear and the program continues to retrieve data after calling HRDLSetDigitalIOChannel. Also all outputs returned from HRDLSetDigitalIOChannel are as expected however the voltage at the pins does not appear to switch to high. Any sample codes that control the digital outputs or any other advice would be of great help.
Cheers

TSmart
Newbie
Posts: 0
Joined: Tue Feb 21, 2017 4:19 am

Re: ADC - 24 Digital outputs not working

Post by TSmart »

After following the digital output function with a HRDLGetUnitInfo function copied from a sample from a different thread I found that one of my parameters had been set up incorrectly. All seems to be working correctly now. Hope this helps anyone facing similar issues.

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: ADC - 24 Digital outputs not working

Post by Martyn »

Thank you for updating us, good to hear it is working now :)
Martyn
Technical Support Manager

Post Reply