How do you scale the math channel?

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
siliciumenergy
Newbie
Posts: 0
Joined: Tue Nov 15, 2016 7:15 pm

How do you scale the math channel?

Post by siliciumenergy »

I can change the vertical scale for channel A and B on the left upper corner, but how do I change the vertical scale in the math channel? Please see the attached picture.
Attachments
math channel problem.jpg
Top
Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: How do you scale the math channel?

Post by Gerry »

Hi siliciumenergy,

You need to scale the math channel in the 'Edit' window of the 'Math channels' menu option.

First of all, if the Math channel is in an existing Library (not one you created) you will have to create a duplicate to be able to edit it. Then just do the following:
  • Go to Edit->Next->Next to get to the range and units window.
    Set the Units to be used for the scaling by entering the acronym that you would like to see on the scale for the units in the 'Short Name' box, and then enter the full name of the of the units in the 'Long name' box.
    Tick the 'Override automatic range selection.' option under Range, set the maximum & minimum values for the range to be displayed at the top and bottom of the scale.
    Click Next->Finish to complete the change.
Regards,

Gerry
Gerry
Technical Specialist
Top
Post Reply

Return to “PicoScope 6 for Windows”