ChA+ChB ; ChA*ChB ; Invert ChA ...

Forum for discussing PicoScope (version 5)
Post Reply
arielmedina61
Active User
Active User
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina
Contact:

ChA+ChB ; ChA*ChB ; Invert ChA ...

Post by arielmedina61 »

Is possible to use math functions with chA and chB?

CHA + CHB
CHA * CHB
Invert a channel ..

Thanks,

Ariel.

davidj
Site Admin
Site Admin
Posts: 43
Joined: Wed Oct 11, 2006 8:50 am
Location: St. Neots, Cambs, UK

ChA+ChB ; ChA*ChB ; Invert ChA ...

Post by davidj »

Hi Aerial,

Thank you for your post.

In PicoLog you could use the Calculated Parameters function that may suit your needs. However, PicoScope does not have any math functions. You will need to write your own software to facilitate this.
Regards,
David

alan
Site Admin
Site Admin
Posts: 195
Joined: Thu May 25, 2006 8:02 am

Post by alan »

Hi,

You can easily invert a channel in PicoScope by setting a custom range. For example if you select

1000 -1000
0 0
-1000 1000

As the scaling then you have a 1V range that is inverted.

Regards
Alan

arielmedina61
Active User
Active User
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina
Contact:

Post by arielmedina61 »

David:
Thank you for your post.

Regards,

Ariel.

arielmedina61
Active User
Active User
Posts: 21
Joined: Fri Sep 23, 2005 1:17 pm
Location: Buenos Aires-Argentina
Contact:

Post by arielmedina61 »

Hi Alan

Your suggestion is very ingenious!!!!

Thank you.


Ariel.

Post Reply