Function generator

Post any questions you may have about our current range of oscilloscopes
Post Reply
mokankanna
Newbie
Posts: 0
Joined: Tue May 24, 2016 5:36 am
Location: India

Function generator

Post by mokankanna »

Hello,
we have purchased your scope model 6402C.
The output of the function generator was set at 2V peak to peak.
The output voltage amplitude keeps droping as the frequency is increased from 100 Hz to 1MHz.
Is this normal.

Gerry
PICO STAFF
PICO STAFF
Posts: 1145
Joined: Mon Aug 11, 2014 11:14 am

Re: Function generator

Post by Gerry »

Hi mokankanna,

It isn't normal to have a significant drop in level if you are just capturing the generated waveform with no processing, and a fast enough sample rate. Could you post a saved psdata file so that we can see how you have the PicoScope setup.

Regards,

Gerry
Gerry
Technical Specialist

mokankanna
Newbie
Posts: 0
Joined: Tue May 24, 2016 5:36 am
Location: India

Re: Function generator

Post by mokankanna »

Jerry,
Thanks for the reply.
Sorry, the cable (50 Ohm BNC) was not soldered properly.

Regards,
Mokan kanna

Post Reply