reading flow/ temperture/ and ph to a data logger

Which product is right for your exact requirements
Post Reply
jpw

reading flow/ temperture/ and ph to a data logger

Post by jpw »

i have to measure flow temperture and ph from our effluent discharge,
i have all these three devices installed but for some unknown reason a coupling divice was not included to transmit this data to a computor to show live reading of all three .
do you have a data logger with a with a programe suitable for windows xp so i can read the measurments live and record every hour.

jim

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Jim,

Thank you for your post.

We may well have a suitable device for this. A lot will depend on your sensor outputs. If you can supply this information we will be able to help you further.

What we need:
Output variable-Volts, amps etc
Output range-10v, 4-20mA etc.
Sampling interval

Many thanks.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

jpw

measuring temperture , ph , and flow

Post by jpw »

by any chance do you have a data logging device that will measure temperture , ph , and flow (via ultra sonic)

a logging unit supplied with all three measuring devices and suitable soft wear?

Sarah

Post by Sarah »

Hi

Thank you for your post.

Our DrDAQ logger will measure both temperature and pH and has a voltage input too so you could connect another sensor up to this. We do not sell sensors to measure flow but the DrDAQ may be able to support them if they have a suitable output.

http://www.drdaq.com/

Best Regards

Post Reply