PicoScope 7 Software
Available on Windows, Mac and Linux
Record result of measurement after capture
-
james.holmes
- Newbie
- Posts: 0
- Joined: Wed Mar 16, 2016 4:41 pm
Record result of measurement after capture
I have a Picoscope 3204A reading voltages and integrating them. I'm using a 'Measurement - Maximum' to read the final integrated value over the time period before starting the process again to capture the next sample.
I see that I can trigger an alarm on a successful capture which can cause a beep, record the entire dataset or launch an executable, but how do I simply record the measured value to a file? i.e. "2.437 V".
In the past I've used Picolog but I don't think it's supported for this scope?
Thanks for any help,
James.
I see that I can trigger an alarm on a successful capture which can cause a beep, record the entire dataset or launch an executable, but how do I simply record the measured value to a file? i.e. "2.437 V".
In the past I've used Picolog but I don't think it's supported for this scope?
Thanks for any help,
James.
-
Hitesh
Re: Record result of measurement after capture
Hi James,
You can export the Measurement data to a file using a command prompt window - please refer to this post.
Unfortunately, the PicoScope 3204A is not supported by the PicoLog software.
Regards,
You can export the Measurement data to a file using a command prompt window - please refer to this post.
Unfortunately, the PicoScope 3204A is not supported by the PicoLog software.
Regards,