5244A to measure PWM?

Post any questions you may have about our current range of oscilloscopes
Post Reply
jhoyle
Newbie
Posts: 0
Joined: Fri Oct 30, 2015 1:14 pm

5244A to measure PWM?

Post by jhoyle »

Hi Everyone

Is there a way to graph PWM signal? I need to verify a 8-92% duty cycle signal. It is being generated at 500 hz I believe. It is an engine throttle control signal for ecu. I am just trying to verify the signal is ok.
A graph is ideal to show no fluctuations in the pwm output.

Thanks
:mrgreen:


Model: PicoScope 5244A
Serial Number: CP897/024
USB Version: 2.0
Calibration Date: Tuesday, September 01, 2015
Hardware Version: 1
Driver Version: 1.1.5.26
Firmware Version: 1.3.3.0 / 1.0.24.0

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 5244A to measure PWM?

Post by Martyn »

Yes, there is a maths channel that will graph the duty cycle for you :D

Tools->MathsChannels->Create and then select Advanced button and you will see Duty as one of the options.
Martyn
Technical Support Manager

Post Reply