2204 stopped working

Post any questions you may have about our current range of oscilloscopes
Post Reply
fritsphilips
Newbie
Posts: 0
Joined: Fri Feb 19, 2016 8:04 pm

2204 stopped working

Post by fritsphilips »

Hi All,

My first post here, and unfortunately with some problems.

My 2204 started to behave strange, slow reaction and some strange spikes in the negative range of about .5 till 1v with nothing connected. This happened on a mac with 10.9
Connected the 2204 to a pc but the problems kept on going.
Back to the mac again.
Trying to debug this, I connected the gen out via bnc to channel A and the scope got hot, disconnected the scope.

All I get now is a flat line from either chan A or chan B, the signal generator still works (tested it with my trusty fluke scopemeter)

Any ideas on how this happened?

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2204 stopped working

Post by Martyn »

Please contact support@picotech.com
I have not heard of a scope getting hot like that during normal operation, so there may be a fault with it.
Martyn
Technical Support Manager

Post Reply