Long readings

Which product is right for your exact requirements
Post Reply
Acidshock

Long readings

Post by Acidshock »

High I was wondering if any product you guys make could reading in a signal that was about 13 seconds long. Curently I have a 3206 but the max I get is about 5 seconds of buffer.

User avatar
ricardo
Advanced User
Advanced User
Posts: 71
Joined: Wed May 07, 2003 9:43 am

Post by ricardo »

Hi Acidshock,

The longest timebase in PicoScope is 50s/div so the longest capture you can take is 500s.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Acidshock

Post by Acidshock »

ricardo wrote:Hi Acidshock,

The longest timebase in PicoScope is 50s/div so the longest capture you can take is 500s.

Best regards,

Ric
Unfortunately we need the resolution, we basically need a 2MS buffer.

Guest

Post by Guest »

Acidshock wrote:
ricardo wrote:Hi Acidshock,

The longest timebase in PicoScope is 50s/div so the longest capture you can take is 500s.

Best regards,

Ric
Unfortunately we need the resolution, we basically need a 2MS buffer.
Too bad you guys dont have a Ram FIFO controller so that the data could be sucked out of the buffer as fast as its being put in.

User avatar
ricardo
Advanced User
Advanced User
Posts: 71
Joined: Wed May 07, 2003 9:43 am

Post by ricardo »

Hi Acidshock,

I'm sorry we can't help you in this instance the scope with the largest buffer we have to offer is the 3206 with 1 MS.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply