About osciolloscope 3423.

Which product is right for your exact requirements
Post Reply
Edgars

About osciolloscope 3423.

Post by Edgars »

Is it possible connect osciolloscope 3423 and normaly work to laptop PC? If not, what you advise for laptop computer. Currently I need osciollospe vith input voltage range up to 50 V and ability to work with laptop PC.
Thank you.
:roll:

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

3423

Post by Autonerdz »

Edgars,

Good choice.

It will work great on a laptop meeting the minimum requirements listed:

http://www.picotech.com/auto/automotive ... scope.html

Best performance is with USB 2.0. The 3423 only works with the automotive software.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

Edgars

Still have a question

Post by Edgars »

Is it possible connect osciolloscope 3423 and normaly work to laptop PC? If not, what you advise for laptop computer. Currently I need osciollospe vith input voltage range up to 50 V and ability to work with laptop PC.

Yes it is for automotive use, but what I have to use for radio? Because +-20 volts is to small range for me. Thanks for everything.
:?:

User avatar
Autonerdz
Advanced User
Advanced User
Posts: 141
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA
Contact:

radio

Post by Autonerdz »

I'm not a radio guy but It's still a fully functional oscilloscope and I don't see why you would not be able to use it for that application unless you need something like Picolog which does not come with the software package for that unit. If you did choose a non-automotive unit like the 3424, you could just use attenuators to increase the input scaling.

I'll let the Pico staff help you from here. They would know this application better than I. I'm an automotive specialist.
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

User avatar
ricardo
Advanced User
Advanced User
Posts: 71
Joined: Wed May 07, 2003 9:43 am

Post by ricardo »

Hi Edgars,

What are your requirements for radio use? The 3423 has a +/-50V range so from what you are saying it should be suitable.

Best regards,

Ric
Ricardo Paloschi
Sales Engineer
Forum Moderator

Post Reply