Using Serial and USB TC-08s

Having problems ? let us know the details here
Post Reply
kmaccabe

Using Serial and USB TC-08s

Post by kmaccabe »

I need 16 channels of measurement so I am trying to perform a test using both the USB and Serial TC-08s. I have installed the software for the USB but am having problems using the Serial TC-08 as the driver is not found.

Is it possible to use these two different types of TC-08 in the same test?

If so, how do I get around the driver problem?

kmaccabe

Serial Driver

Post by kmaccabe »

I have also removed the software completely and re-installed just the serial version and the driver V2.6 is still not found when I attempt to edit the channel information in the recorder settings.

kmaccabe

solved

Post by kmaccabe »

Solved the problem. I had a duff serial cable. :oops:

guest

Adding a USB TC-08 to a well working serial TC-08

Post by guest »

Hi, We have used a serial TC-08 for years with good results. Friday we recieved a new USB TC-08. Two different computers recognise new hardware but cannot find drivers on the install CD or on the net. Is the top center LED supposed to occasionally light? Other USB devices work well in the same ports.
Thanks Jerry

Jerry
Newbie
Posts: 1
Joined: Tue Mar 28, 2006 3:56 am

Adding a USB TC-08 to a well working serial TC-08

Post by Jerry »

Problem discovered,
When downloading the software I neglected to check the box "use multiple devices" and therefore the software had only the serial driver. Jerry

Post Reply