PicoScpe 3403D and AnywhereUSB

Having problems ? let us know the details here
Post Reply
JimB
Newbie
Posts: 1
Joined: Fri Jan 15, 2016 1:43 pm

PicoScpe 3403D and AnywhereUSB

Post by JimB »

I’m trying a PicoScope 3403D over a USB-to-LAN converter (Digi AnywhereUSB/2).

The link works OK, having tried it with a USB mouse, but the PicoScope is not detected and cannot enumerate. The scope works fine when connected directly to the PC.

I checked the AnywhereUSB/2 compatibility notes, and it says that 'bulk' or 'interrupt' type devices should work, but there is limited support for mass storage, Isochronous and video streaming devices. Could this be the problem?

Any advice on using this or other USB-over-IP hubs?

AndrewA
PICO STAFF
PICO STAFF
Posts: 401
Joined: Tue Oct 21, 2014 3:07 pm

Re: PicoScpe 3403D and AnywhereUSB

Post by AndrewA »

Hello Jim,

I can confirm our devices use 'Isochronous' and 'bulk' transfer mode.

We have successfully tested the IOGEAR GUWIP204 Wireless 4-Port USB Sharing Station.
The device has Wifi and LAN connections both work with the PicoScope devices.
See attached instructions.
Set_up_the_IOGEAR_GUWIP204.pdf
Set_up_the_IOGEAR_GUWIP204
(357.96 KiB) Downloaded 504 times
Regards Andrew
Technical Specialist

Post Reply