PT104 Greisinger GOF401 Sensor

Post any questions you may have about our current range of USB data loggers
Post Reply
KurtYard
Newbie
Posts: 0
Joined: Thu Dec 17, 2015 9:04 am

PT104 Greisinger GOF401 Sensor

Post by KurtYard »

Dear Forum,
our company bought a PT104 logger with a bunch of PT100 sensors from Greisinger. (for air, liquids etc.)
I can't bring this to work with using Picolog 5.24.8 W7 64bit.
I only get some asteriks in the "Reading" column. I configured for 4 wire PT100 sensor, I checked all channels.
If I change to resistance i.e. I get an always "wobbling" value in the reading column.
If I measure inbetween the 4 wires of the sensor I measure 108 ohms between 1-3 1-2 4-2 4-3
This is the same for all sensors (different types from Greisinger with Mini DIN and PT100 standard)
Any suggestions would be very helpful

KurtYard (Germany-Hamburg)

AndrewA
PICO STAFF
PICO STAFF
Posts: 400
Joined: Tue Oct 21, 2014 3:07 pm

Re: PT104 Greisinger GOF401 Sensor

Post by AndrewA »

Hello KurtYard,

Please check your connections, on page 9-
https://www.picotech.com/download/manua ... 4.en-2.pdf
Are you using the Screw Terminal Adapter?-
https://www.picotech.com/download/manua ... uide-1.pdf
Regards Andrew
Technical Specialist

Post Reply