Can't install latest PicoLog

Forum for discussing PicoLog
Post Reply
tom

Can't install latest PicoLog

Post by tom »

I've downloaded the latest version of Picolog (PicoFull_r5_13_7.exe) for use with my serial TC-08, but when I run the installer it tries to start then fails with the error message 'Windows Installer: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package'.

I'm running Windows XP SP1 and am logged on as administrator.

stu

windows installer error

Post by stu »

i appear to be having this problem too - on both windows 98 & XP machines.

without wanting to point the finger, it would appear to be a problem with the installer rather than the individual machines.

stu

windows installer error

Post by stu »

just to add that my errors were appearing from the USB adc-11/12 installer for R5 13 7

jukka

Post by jukka »

Exactly same problem than Tom has. Any fix coming up...?

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

We have had a few comments like this since changing over to the new installer package.

Firstly, try downloading only the relevant software package. Then you will need to stay connected to the web during installation.

If you are still having problems, please email support@picotech.com

We will send you disk if you are still having problems.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply