Multiple data logs

Forum for discussing PicoLog
Post Reply
orbik
User
User
Posts: 3
Joined: Fri Dec 02, 2005 9:04 am

Multiple data logs

Post by orbik »

Hi im haveing a problem with the data logging on the TC-08 serial

When the first measurement is recorded (for arguments sake every 30 seconds)

The next record at 30secs is the same as 0sec first record bar a few .xxC

so it goes like this

0. 21.32C
30. 21.56C
60. ******

After the first 2 readings its fine :?

Even if a heat the thermocouple very fast after the initial start temp the second reading is 'out' :?

Can anyone shed some light to why it does this please?


Thanks

Alex

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello Alex,

I have replied to you via email.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

orbik
User
User
Posts: 3
Joined: Fri Dec 02, 2005 9:04 am

Post by orbik »

Cheers Michael, But nothing has come through yet. Could you resend again please.

Try this email 'TECHNICAL@Orbik.co.uk' please if you are not already.

Thanks mate


Alex

orbik
User
User
Posts: 3
Joined: Fri Dec 02, 2005 9:04 am

Post by orbik »

Can some one please get back to me with an update on the problem i am encountering thanks . This is the last email i have had.
Hello,

This anomoly appears to be cold junction compensation set up. I will look into further for you.

Best regards,
Michael - Tech Support
dated 8/12/2005

Thanks kindly

Alex

Guest

Post by Guest »

Hello can some one at Pico tech support please let me no what has been done to figure out the issue im having :idea:

I have had no responce not even a 'we are working on it'

If you can not solve the issue an email or PM would be most greatfull.

Alex




/feeling ignored :cry:

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

We are looking into this but have not been able to reproduce your problem.

This could be down to the log file setup. Please send us your *.plw file with the mentioned anomoly and recorder.pls file from your .../Pico/ directory.

This will help us to identify your particular problem.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Guest

Post by Guest »

I have just sent the .pwl file and the recorder file as requested.

Alex

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Hello,

I will review the files and get back to you.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply