Technical question "PicoLog 1000Series & PicoScope 5000Seri"

Which product is right for your exact requirements
Post Reply
Antoine
Newbie
Posts: 0
Joined: Fri Oct 02, 2015 8:32 am

Technical question "PicoLog 1000Series & PicoScope 5000Seri"

Post by Antoine »

Good morning,

I’m an engineer student working at the German Space Center in Cologne.

We will soon perform an experiment during a parabolic flight and we will use the following products: “Picolog 1000 Series” and “PicoScope 5000 Series”.

During a parabolic flight all the components of the experiment need to be fix. To fix those component we decided to screw them to a plate by the existent feet above the pieces.

However, we didn’t receive yet the products and we need to prepare the plate making holes in it to screw them.

So I would like to know of some of you had already those pieces and could provide me the distances between the feet of the products for both of them, because this information is nowhere available.


Thank you.

Sincerely,
Antoine

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Technical question "PicoLog 1000Series & PicoScope 5000S

Post by Martyn »

For requests of this nature please contact the team directly at support@picotech.com
Martyn
Technical Support Manager

Antoine
Newbie
Posts: 0
Joined: Fri Oct 02, 2015 8:32 am

Re: Technical question "PicoLog 1000Series & PicoScope 5000S

Post by Antoine »

Still no answer from them after 1,5 weeks

Martyn
Site Admin
Site Admin
Posts: 4491
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Technical question "PicoLog 1000Series & PicoScope 5000S

Post by Martyn »

I can't find any email requests from you for this information, please resend using our email address support@picotech.com
Martyn
Technical Support Manager

Post Reply