3000 series composite view

Post any questions you may have about our current range of oscilloscopes
Post Reply
jarvissamuel
User
User
Posts: 2
Joined: Wed May 18, 2005 5:11 am
Location: Denver Colorado

3000 series composite view

Post by jarvissamuel »

Hello I am currently a 212-3 owner and have found the ability for composite views very helpful. Recently I downloaded the newest software so I could observe a 3423 file sent to me. I set the converter to 3000 series and was able to observe the file. I then tried to merge the file to look at 2 different parts of the trace at the same time and encountered an error message displaying the triggeres were not compatible. I have this error in the past when triggers were different on the 212-3 model but this is the same exact file with the exact same trigger.

I eventually intend to a aquire a 3423 but would really like the file merge/composite view ability to be functional. I did check the file merge option with the new download and the 212-3 it still works normally. If the software team could be informed of this so maybe it can be corrected it would be great.

Thank you for your time.

Michael
Advanced User
Advanced User
Posts: 656
Joined: Thu Jul 07, 2005 12:41 pm
Location: St Neots, Cambridgeshire

Post by Michael »

Thank you for your post.

We will take this into consideration for our next software update.

Best regards,
Michael
Michael - Tech Support
Pico Technology
Web Support Forum

Post Reply