Test and Measurement Forum

PicoScope 2204 triggering question

Forum for discussing PicoScope version 6 (non-automotive version)

PicoScope 2204 triggering question

Postby wkdurfee » Fri Aug 07, 2015 2:39 pm

I am running PicoScope 6 with PicoScope 2204 hardware. I'm triggering off an occasional 100 us wide logic pulse. The pulse is 5V high and the trigger level is 1V. My question is this. When the channel range is set to +/-10 V (or lower), the trigger works. When the channel range is set to +/-20V, it misses triggers and goes only on every third or fourth pulse. Is there a reason for this?
Posts: 0
Joined: Fri Aug 07, 2015 2:33 pm

Re: PicoScope 2204 triggering question

Postby Martyn » Mon Aug 10, 2015 12:41 pm

Can you save a psdata file for the current waveform and post it so we can take a look at the settings. Additionally please post the onformation from Help->About as this will give all the driver versions.
Technical Support Manager
Site Admin
Site Admin
Posts: 3110
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Return to PicoScope 6 for Windows

Who is online

Users browsing this forum: No registered users and 2 guests