Time interval, sampling

Forum for discussing PicoLog
Post Reply
Pavlik

Time interval, sampling

Post by Pavlik »

Hello,

Why first sample after the triggering is on 4ns. I need uniform sampling increment.

Thank you for your help

-45 0
-40 1
-35 0
-30 -1
-25 -1
-20 2
-15 -1
-10 2
-5 1
0 78
4 -19

9 -69
14 -55
19 -17
24 24
29 67
34 48
39 -45
44 -60
49 25
54 52

Sarah

Post by Sarah »

Hi

Thank you for your post.

Does this happen every time? The sampling may vary very slightly and a 1ns difference at one point in the capture is still quite consistent. If it is always happening then let me know, but you might find it only happens sometimes.

Best Regards

pavlik

timing problem

Post by pavlik »

Dear Sarah.

For me is enough to happen once. Due to this fact I can't use FlexPro for signal analysis.
Seems that it is known situation.

Let we know how to obtain uniform sampling increment from the beginning to the end of the data.

Could you please check my other posts and give answer.

Thank you very much.

Best Regards

Pavlik

Sarah

Post by Sarah »

Hi Pavlik

I believe this may be as uniform as it gets. If it is an intermittent, very small difference as this appears to be, then I don't know of any way to avoid it.

Best Regards

Post Reply