PicoScope 7 Software
Available on Windows, Mac and Linux
Moving from ADC-212 to PS-3423
-
kenauer
Moving from ADC-212 to PS-3423
We have been using the ADC-212 for a diagnostic product and are wanting to also support the PS3423. We directly connect to the driver software.
The settings we used to collect data on the ADC-212 do not map directly, but we've figured out how to map the differences... we think. However, the data we collect comes back with completely different results. The scale of the values seems hugely different. instead of ranging from 1 to 781 we are getting results ranging from -32767 to 10059.
Perhaps we're missing something in the documentation that tells us how to map these differently. Any pointers?
The settings we used to collect data on the ADC-212 do not map directly, but we've figured out how to map the differences... we think. However, the data we collect comes back with completely different results. The scale of the values seems hugely different. instead of ranging from 1 to 781 we are getting results ranging from -32767 to 10059.
Perhaps we're missing something in the documentation that tells us how to map these differently. Any pointers?
