Post any questions you may have about our current range of oscilloscopes
hdrobien
Newbie
Posts: 0 Joined: Mon Dec 01, 2014 12:46 pm
Post
by hdrobien » Mon Dec 01, 2014 12:52 pm
Hi
I own a Picoscope 2203 that I am very pleased with.
However, I wonder why I can not go below 250 mV level with the signal generator.
I would also appreciate the possibility to set level as RMS, not amplitude.
Regards.
Hitesh
Post
by Hitesh » Thu Dec 04, 2014 11:04 am
Hi,
The 250mV limit was by design.
I have been advised by members of the Development Team that this has been looked at. A fix should be available in a future release of the driver and PicoScope 6 but I cannot advise on timescales at the present moment.
I will put forward a feature request for the level to be set as an RMS value - you should be able to calculate this in the meantime.
Regards,
hdrobien
Newbie
Posts: 0 Joined: Mon Dec 01, 2014 12:46 pm
Post
by hdrobien » Fri Dec 05, 2014 10:28 am
Hi
Thanks for the answer.
hdrobien
Newbie
Posts: 0 Joined: Mon Dec 01, 2014 12:46 pm
Post
by hdrobien » Wed Jul 08, 2015 9:54 am
Hi
Any news about my request ?
Regards.
Hitesh
Post
by Hitesh » Mon Jul 13, 2015 1:00 pm
Hi hdobrien,
Not at the present moment - are you able to adjust the amplitude according to the desired RMS value?
Regards,
hdrobien
Newbie
Posts: 0 Joined: Mon Dec 01, 2014 12:46 pm
Post
by hdrobien » Fri Jan 15, 2016 4:26 pm
Hi
Any news about the request to lower the minimal level of the signal generator ?
Hitesh
Post
by Hitesh » Mon Jan 18, 2016 10:26 am
Hi hdobrien,
This has been fixed - please download the latest PicoScope 6 software (6.11.10) from our Downloads page or via the Help -> Check for Updates... option in the software.
Regards,
hdrobien
Newbie
Posts: 0 Joined: Mon Dec 01, 2014 12:46 pm
Post
by hdrobien » Mon Jan 18, 2016 5:29 pm
Thanks a lot !
Pradeep
Newbie
Posts: 1 Joined: Mon Apr 04, 2016 10:21 am
Post
by Pradeep » Tue May 10, 2016 8:19 am
I have Picoscope 3406D MSO. Is it now possible for signal generator to go below 250mV? Please let me know.
Hitesh
Post
by Hitesh » Thu May 12, 2016 10:13 am
Hi Pradeep,
Yes, this is possible.
One way to check this (if using the SDK as you are doing) is to test using the PicoScope 6 software.
Regards,