PicoScope 7 Software
Available on Windows, Mac and Linux
Error using icdevice/connect
Error using icdevice/connect
The unit will not connect via Matlab, but will connect with the software from pico. I am using software PicoScope Oscilloscope Software 6.10.16 and 64 bit matlab R2014a. I copied all dll to MATLAB path. And I installed windows sdk 7.1.
When running "connect(ps6000DeviceObj);" i got this:
An error occurred while executing the driver connect code.
Library was not found
If this error is not an instrument error, use MIDEDIT to inspect the driver.
When running "connect(ps6000DeviceObj);" i got this:
An error occurred while executing the driver connect code.
Library was not found
If this error is not an instrument error, use MIDEDIT to inspect the driver.
-
Hitesh
Re: Error using icdevice/connect
Hi zouluwei,
A change was made to the USB kernel drivers relating to USB 3.0 device with PicoScope 6.10.16 which means that the drivers in the SDK will not work with this new set of kernel drivers.
We are waiting for a new SDK to be uploaded which will resolve this problem.
In the meantime, please e-mail support@picotech.com and we will make an installer available for you.
Regards,
A change was made to the USB kernel drivers relating to USB 3.0 device with PicoScope 6.10.16 which means that the drivers in the SDK will not work with this new set of kernel drivers.
We are waiting for a new SDK to be uploaded which will resolve this problem.
In the meantime, please e-mail support@picotech.com and we will make an installer available for you.
Regards,