Pico ADC 16

Forum for discussing PicoLog
Post Reply
Barry Jackson

Pico ADC 16

Post by Barry Jackson »

:?: Does the PICO ADC 16 use all the pins on the RS232 cable? can I get away with TX RX and Gnd?

I await your response.

Sarah

Post by Sarah »

Hi

Thank you for your post.

The ADC-16 needs the following pins:

Pin 2 = Data from unit to the PC
Pin 3 = Data from PC to the unit
Pin 4 = -7V
Pin 5 = Gnd
Pin 7 = +7V

Hope this helps

Best Regards

Post Reply